THE FOLLOWING FILE SYSTEM HAD AN UNEXPECTED INCONSISTENCY:
ffs: fa50b3edace170b1.e (/var)
Automatic file system check failed: help!
Enter pathname of shell or RETURN for sh:
wrdl5# fsck -t ffs /dev/sd1e
** /dev/rsd1e
CANNOT READ: BLK 128
CONTINUE? [Fyn] y
THE FOLLOWING DISK SECTORS COULD NOT BE READ: 128, 129, 130, 131,
132, 133, 134, 135, 136, 137, 138, 139, 140, 141, 142, 143,
/dev/rsd1e: CANNOT READ DISKLABEL
wrdl5#
The laptop concerned is a Dell M6600 circa 2011 that I have
owned since it was new. All internal components are original
including the 2 750Gb spinning disks.
Is the fsck failed partition recoverable, or should I assume
the sd1 disk is at end of (a long) life?
I have left the laptop running at the shell prompt above.
TIA for your helpful comments.
Regards, Avon
Previous kern.version in case it is useful (which I doubt).
OpenBSD 7.6-current (GENERIC.MP) #523: Thu Jan 30 18:52:21 MST 2025
dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 17035309056 (16246MB)
avail mem = 16495280128 (15731MB)
random: good seed from bootblocks
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.6 @ 0xf1ed0 (109 entries)
bios0: vendor Dell Inc. version "A18" date 09/14/2018
bios0: Dell Inc. Precision M6600
efi0 at bios0: UEFI 2.0
acpi0 at bios0: ACPI 4.0
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP APIC TCPA SSDT MCFG HPET BOOT SSDT SSDT SLIC SSDT
acpi0: wakeup devices UAR1(S3) EHC1(S3) EHC2(S3) HDEF(S4) GLAN(S4) RP01(S4)
PXSX(S4) RP02(S4) PXSX(S4) RP03(S4) PXSX(S4) RP04(S4) PXSX(S4) RP05(S4)
PXSX(S4) RP06(S4) [...]
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM) i7-2820QM CPU @ 2.30GHz, 2294.87 MHz, 06-2a-07, patch
0000002f
cpu0: cpuid 1
edx=bfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
ecx=17bae3ff<SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX>
cpu0: cpuid 6 eax=77<SENSOR,ARAT> ecx=9<EFFFREQ>
cpu0: cpuid 7.0 edx=9c000400<MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD>
cpu0: cpuid a vers=3, gp=8, gpwidth=48, ff=3, ffwidth=48
cpu0: cpuid d.1 eax=1<XSAVEOPT>
cpu0: cpuid 80000001 edx=28100800<NXE,RDTSCP,LONG> ecx=1<LAHF>
cpu0: cpuid 80000007 edx=100<ITSC>
cpu0: MELTDOWN
cpu0: 32KB 64b/line 8-way D-cache, 32KB 64b/line 8-way I-cache, 256KB 64b/line
8-way L2 cache, 8MB 64b/line 16-way L3 cache
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
cpu0: apic clock running at 99MHz
cpu0: mwait min=64, max=64, C-substates=0.2.1.1.2, IBE
cpu1 at mainbus0: apid 2 (application processor)
cpu1: Intel(R) Core(TM) i7-2820QM CPU @ 2.30GHz, 2294.92 MHz, 06-2a-07, patch
0000002f
cpu1: smt 0, core 1, package 0
cpu2 at mainbus0: apid 4 (application processor)
cpu2: Intel(R) Core(TM) i7-2820QM CPU @ 2.30GHz, 2294.99 MHz, 06-2a-07, patch
0000002f
cpu2: smt 0, core 2, package 0
cpu3 at mainbus0: apid 6 (application processor)
cpu3: Intel(R) Core(TM) i7-2820QM CPU @ 2.30GHz, 2295.08 MHz, 06-2a-07, patch
0000002f
cpu3: smt 0, core 3, package 0
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
acpimcfg0 at acpi0
acpimcfg0: addr 0xf8000000, bus 0-63
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (P0P1)
acpiprt2 at acpi0: bus 2 (RP01)
acpiprt3 at acpi0: bus 3 (RP02)
acpiprt4 at acpi0: bus 4 (RP03)
acpiprt5 at acpi0: bus 10 (RP04)
acpiprt6 at acpi0: bus -1 (RP05)
acpiprt7 at acpi0: bus -1 (RP06)
acpiprt8 at acpi0: bus -1 (RP07)
acpiprt9 at acpi0: bus 11 (RP08)
acpiprt10 at acpi0: bus 1 (PEG0)
acpiprt11 at acpi0: bus -1 (PEG1)
acpiprt12 at acpi0: bus -1 (PEG2)
acpiprt13 at acpi0: bus -1 (PEG3)
acpiec0 at acpi0
acpipci0 at acpi0 PCI0: 0x00000004 0x00000011 0x00000001
acpicmos0 at acpi0
com0 at acpi0 UAR1 addr 0x3f8/0x8 irq 4: ns16550a, 16 byte fifo
"SMO8800" at acpi0 not configured
acpibtn0 at acpi0: LID_(wakeup)
acpibtn1 at acpi0: PBTN(wakeup)
acpibtn2 at acpi0: SBTN
acpiac0 at acpi0: AC unit online
acpibat0 at acpi0: BAT0 model "DELL HPNYM17" serial 416 type LION oem "SMP"
"*pnp0c14" at acpi0 not configured
acpicpu0 at acpi0: C3(200@109 mwait.1@0x30), C2(500@80 mwait.1@0x10), C1(1000@1
mwait.1), PSS
acpicpu1 at acpi0: C3(200@109 mwait.1@0x30), C2(500@80 mwait.1@0x10), C1(1000@1
mwait.1), PSS
acpicpu2 at acpi0: C3(200@109 mwait.1@0x30), C2(500@80 mwait.1@0x10), C1(1000@1
mwait.1), PSS
acpicpu3 at acpi0: C3(200@109 mwait.1@0x30), C2(500@80 mwait.1@0x10), C1(1000@1
mwait.1), PSS
acpitz0 at acpi0: critical temperature is 107 degC
acpivideo0 at acpi0: VID_
acpivout0 at acpivideo0: LCD_
acpivideo1 at acpi0: VID_
acpivout1 at acpivideo1: LCD_
cpu0: using VERW MDS workaround (except on vmm entry)
cpu0: Enhanced SpeedStep 2294 MHz: speeds: 2301, 2300, 2000, 1800, 1600, 1400,
1200, 1000, 800 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Core 2G Host" rev 0x09
ppb0 at pci0 dev 1 function 0 "Intel Core 2G PCIE" rev 0x09: msi
pci1 at ppb0 bus 1
vendor "NVIDIA", unknown product 0x0e3a (class display subclass VGA, rev 0xa1)
at pci1 dev 0 function 0 not configured
azalia0 at pci1 dev 0 function 1 vendor "NVIDIA", unknown product 0x0beb rev
0xa1: msi
azalia0: no supported codecs
inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics 3000" rev 0x09
drm0 at inteldrm0
inteldrm0: msi, SANDYBRIDGE, gen 6
"Intel 6 Series MEI" rev 0x04 at pci0 dev 22 function 0 not configured
puc0 at pci0 dev 22 function 3 "Intel 6 Series KT" rev 0x04: ports: 16 com
com4 at puc0 port 0 apic 2 int 17: ns16550a, 16 byte fifo
com4: probed fifo depth: 0 bytes
em0 at pci0 dev 25 function 0 "Intel 82579LM" rev 0x04: msi, address
d0:67:e5:3b:30:67
ehci0 at pci0 dev 26 function 0 "Intel 6 Series USB" rev 0x04: apic 2 int 16
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00
addr 1
azalia1 at pci0 dev 27 function 0 "Intel 6 Series HD Audio" rev 0x04: msi
azalia1: codecs: IDT/0x76e7
audio0 at azalia1
ppb1 at pci0 dev 28 function 0 "Intel 6 Series PCIE" rev 0xb4: msi
pci2 at ppb1 bus 2
ppb2 at pci0 dev 28 function 1 "Intel 6 Series PCIE" rev 0xb4: msi
pci3 at ppb2 bus 3
iwn0 at pci3 dev 0 function 0 "Intel Centrino Ultimate-N 6300" rev 0x35: msi,
MIMO 3T3R, MoW, address 24:77:03:07:03:10
ppb3 at pci0 dev 28 function 2 "Intel 6 Series PCIE" rev 0xb4: msi
pci4 at ppb3 bus 4
re0 at pci4 dev 0 function 0 "Realtek 8168" rev 0x03: RTL8168D/8111D (0x2800),
msi, address 00:0a:cd:24:69:46
rgephy0 at re0 phy 7: RTL8169S/8110S/8211, rev. 2
ppb4 at pci0 dev 28 function 3 "Intel 6 Series PCIE" rev 0xb4: msi
pci5 at ppb4 bus 10
xhci0 at pci5 dev 0 function 0 "NEC xHCI" rev 0x04: msix, xHCI 0.96
usb1 at xhci0: USB revision 3.0
uhub1 at usb1 configuration 1 interface 0 "NEC xHCI root hub" rev 3.00/1.00
addr 1
ppb5 at pci0 dev 28 function 7 "Intel 6 Series PCIE" rev 0xb4: msi
pci6 at ppb5 bus 11
vendor "O2 Micro", unknown product 0x11f7 (class serial bus subclass Firewire,
rev 0x05) at pci6 dev 0 function 0 not configured
sdhc0 at pci6 dev 0 function 1 vendor "O2 Micro", unknown product 0x8320 rev
0x05: apic 2 int 16
sdhc0: SDHC 2.00, 50 MHz base clock
sdmmc0 at sdhc0: 4-bit, sd high-speed, mmc high-speed, dma
vendor "O2 Micro", unknown product 0x8330 (class mass storage subclass
miscellaneous, rev 0x05) at pci6 dev 0 function 2 not configured
ehci1 at pci0 dev 29 function 0 "Intel 6 Series USB" rev 0x04: apic 2 int 17
usb2 at ehci1: USB revision 2.0
uhub2 at usb2 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00
addr 1
pcib0 at pci0 dev 31 function 0 "Intel QM67 LPC" rev 0x04
ahci0 at pci0 dev 31 function 2 "Intel 6 Series AHCI" rev 0x04: msi, AHCI 1.3
ahci0: port 0: 3.0Gb/s
ahci0: port 1: 3.0Gb/s
ahci0: port 3: 1.5Gb/s
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, WDC WD7500BPKT-7, 01.0> naa.50014ee6ac3998b0
sd0: 715404MB, 512 bytes/sector, 1465149168 sectors
sd1 at scsibus1 targ 1 lun 0: <ATA, WDC WD7500BPKT-7, 01.0> naa.50014ee6018f0fe9
sd1: 715404MB, 512 bytes/sector, 1465149168 sectors
cd0 at scsibus1 targ 3 lun 0: <MATSHITA, BD-RE UJ242, 1.11> removable
ichiic0 at pci0 dev 31 function 3 "Intel 6 Series SMBus" rev 0x04: apic 2 int 18
iic0 at ichiic0
lisa0 at iic0 addr 0x1d: lis331dl
spdmem0 at iic0 addr 0x50: 4GB DDR3 SDRAM PC3-10600 SO-DIMM
spdmem1 at iic0 addr 0x51: 4GB DDR3 SDRAM PC3-10600 SO-DIMM
spdmem2 at iic0 addr 0x52: 4GB DDR3 SDRAM PC3-10600 SO-DIMM
spdmem3 at iic0 addr 0x53: 4GB DDR3 SDRAM PC3-10600 SO-DIMM
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard
pms0 at pckbc0 (aux slot)
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
efifb at mainbus0 not configured
uhub3 at uhub0 port 1 configuration 1 interface 0 "Intel Rate Matching Hub" rev
2.00/0.00 addr 2
uhub4 at uhub3 port 1 configuration 1 interface 0 "Dell product 0x2513" rev
2.00/a0.05 addr 3
uhidev0 at uhub4 port 1 configuration 1 interface 0 "Logitech USB Optical
Mouse" rev 2.00/63.00 addr 4
uhidev0: iclass 3/1
ums0 at uhidev0: 3 buttons, Z dir
wsmouse1 at ums0 mux 0
uhidev1 at uhub4 port 3 configuration 1 interface 0 "Logitech USB Keyboard" rev
1.10/64.00 addr 5
uhidev1: iclass 3/1
ukbd0 at uhidev1: 8 variable keys, 6 key codes
wskbd1 at ukbd0 mux 1
uhidev2 at uhub4 port 3 configuration 1 interface 1 "Logitech USB Keyboard" rev
1.10/64.00 addr 5
uhidev2: iclass 3/0, 3 report ids
ucc0 at uhidev2 reportid 1: 2 usages, 3 keys, enum
wskbd2 at ucc0 mux 1
uhid0 at uhidev2 reportid 2: input=1, output=0, feature=0
ucc1 at uhidev2 reportid 3: 21 usages, 14 keys, enum
wskbd3 at ucc1 mux 1
uhub5 at uhub3 port 2 configuration 1 interface 0 "Dell product 0x2513" rev
2.00/a0.05 addr 6
uhub6 at uhub2 port 1 configuration 1 interface 0 "Intel Rate Matching Hub" rev
2.00/0.00 addr 2
ugen0 at uhub6 port 8 "Broadcom Corp 5880" rev 1.10/1.01 addr 3
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
root on sd1a (fa50b3edace170b1.a) swap on sd1b dump on sd1b
inteldrm0: 1920x1080, 32bpp
wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation), using wskbd0
wskbd1: connecting to wsdisplay0
wskbd2: connecting to wsdisplay0
wskbd3: connecting to wsdisplay0
wsdisplay0: screen 1-5 added (std, vt100 emulation)
iwn0: radio is disabled by hardware switch
--
aer
