On Mar 04 20:57:04, avo...@xtra.co.nz wrote:
> THE FOLLOWING FILE SYSTEM HAD AN UNEXPECTED INCONSISTENCY:
> ffs: fa50b3edace170b1.e (/var)
> Automatic file system check failed: help!
> Enter pathname of shell or RETURN for sh:
>
> wrdl5# fsck -t ffs /dev/sd1e
> ** /dev/rsd1e
>
> CANNOT READ: BLK 128
> CONTINUE? [Fyn] y
>
> THE FOLLOWING DISK SECTORS COULD NOT BE READ: 128, 129, 130, 131,
> 132, 133, 134, 135, 136, 137, 138, 139, 140, 141, 142, 143,
> /dev/rsd1e: CANNOT READ DISKLABEL
> wrdl5#
>
> The laptop concerned is a Dell M6600 circa 2011 that I have
> owned since it was new. All internal components are original
> including the 2 750Gb spinning disks.
>
> Is the fsck failed partition recoverable, or should I assume
> the sd1 disk is at end of (a long) life?
Make sure to destroy that disk
so that no-one will try to use it.
Get a SSD; those are reasonably cheap now
and the machine will be considerably faster.
Better yet, replace both disks with SSDs.
Then restore from backups, obviously.
Jan
> OpenBSD 7.6-current (GENERIC.MP) #523: Thu Jan 30 18:52:21 MST 2025
> dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
> real mem = 17035309056 (16246MB)
> avail mem = 16495280128 (15731MB)
> random: good seed from bootblocks
> mpath0 at root
> scsibus0 at mpath0: 256 targets
> mainbus0 at root
> bios0 at mainbus0: SMBIOS rev. 2.6 @ 0xf1ed0 (109 entries)
> bios0: vendor Dell Inc. version "A18" date 09/14/2018
> bios0: Dell Inc. Precision M6600
> efi0 at bios0: UEFI 2.0
> acpi0 at bios0: ACPI 4.0
> acpi0: sleep states S0 S3 S4 S5
> acpi0: tables DSDT FACP APIC TCPA SSDT MCFG HPET BOOT SSDT SSDT SLIC SSDT
> acpi0: wakeup devices UAR1(S3) EHC1(S3) EHC2(S3) HDEF(S4) GLAN(S4) RP01(S4)
> PXSX(S4) RP02(S4) PXSX(S4) RP03(S4) PXSX(S4) RP04(S4) PXSX(S4) RP05(S4)
> PXSX(S4) RP06(S4) [...]
> acpitimer0 at acpi0: 3579545 Hz, 24 bits
> acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
> cpu0 at mainbus0: apid 0 (boot processor)
> cpu0: Intel(R) Core(TM) i7-2820QM CPU @ 2.30GHz, 2294.87 MHz, 06-2a-07, patch
> 0000002f
> cpu0: cpuid 1
> edx=bfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
>
> ecx=17bae3ff<SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX>
> cpu0: cpuid 6 eax=77<SENSOR,ARAT> ecx=9<EFFFREQ>
> cpu0: cpuid 7.0 edx=9c000400<MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD>
> cpu0: cpuid a vers=3, gp=8, gpwidth=48, ff=3, ffwidth=48
> cpu0: cpuid d.1 eax=1<XSAVEOPT>
> cpu0: cpuid 80000001 edx=28100800<NXE,RDTSCP,LONG> ecx=1<LAHF>
> cpu0: cpuid 80000007 edx=100<ITSC>
> cpu0: MELTDOWN
> cpu0: 32KB 64b/line 8-way D-cache, 32KB 64b/line 8-way I-cache, 256KB
> 64b/line 8-way L2 cache, 8MB 64b/line 16-way L3 cache
> cpu0: smt 0, core 0, package 0
> mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
> cpu0: apic clock running at 99MHz
> cpu0: mwait min=64, max=64, C-substates=0.2.1.1.2, IBE
> cpu1 at mainbus0: apid 2 (application processor)
> cpu1: Intel(R) Core(TM) i7-2820QM CPU @ 2.30GHz, 2294.92 MHz, 06-2a-07, patch
> 0000002f
> cpu1: smt 0, core 1, package 0
> cpu2 at mainbus0: apid 4 (application processor)
> cpu2: Intel(R) Core(TM) i7-2820QM CPU @ 2.30GHz, 2294.99 MHz, 06-2a-07, patch
> 0000002f
> cpu2: smt 0, core 2, package 0
> cpu3 at mainbus0: apid 6 (application processor)
> cpu3: Intel(R) Core(TM) i7-2820QM CPU @ 2.30GHz, 2295.08 MHz, 06-2a-07, patch
> 0000002f
> cpu3: smt 0, core 3, package 0
> ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
> acpimcfg0 at acpi0
> acpimcfg0: addr 0xf8000000, bus 0-63
> acpihpet0 at acpi0: 14318179 Hz
> acpiprt0 at acpi0: bus 0 (PCI0)
> acpiprt1 at acpi0: bus -1 (P0P1)
> acpiprt2 at acpi0: bus 2 (RP01)
> acpiprt3 at acpi0: bus 3 (RP02)
> acpiprt4 at acpi0: bus 4 (RP03)
> acpiprt5 at acpi0: bus 10 (RP04)
> acpiprt6 at acpi0: bus -1 (RP05)
> acpiprt7 at acpi0: bus -1 (RP06)
> acpiprt8 at acpi0: bus -1 (RP07)
> acpiprt9 at acpi0: bus 11 (RP08)
> acpiprt10 at acpi0: bus 1 (PEG0)
> acpiprt11 at acpi0: bus -1 (PEG1)
> acpiprt12 at acpi0: bus -1 (PEG2)
> acpiprt13 at acpi0: bus -1 (PEG3)
> acpiec0 at acpi0
> acpipci0 at acpi0 PCI0: 0x00000004 0x00000011 0x00000001
> acpicmos0 at acpi0
> com0 at acpi0 UAR1 addr 0x3f8/0x8 irq 4: ns16550a, 16 byte fifo
> "SMO8800" at acpi0 not configured
> acpibtn0 at acpi0: LID_(wakeup)
> acpibtn1 at acpi0: PBTN(wakeup)
> acpibtn2 at acpi0: SBTN
> acpiac0 at acpi0: AC unit online
> acpibat0 at acpi0: BAT0 model "DELL HPNYM17" serial 416 type LION oem "SMP"
> "*pnp0c14" at acpi0 not configured
> acpicpu0 at acpi0: C3(200@109 mwait.1@0x30), C2(500@80 mwait.1@0x10),
> C1(1000@1 mwait.1), PSS
> acpicpu1 at acpi0: C3(200@109 mwait.1@0x30), C2(500@80 mwait.1@0x10),
> C1(1000@1 mwait.1), PSS
> acpicpu2 at acpi0: C3(200@109 mwait.1@0x30), C2(500@80 mwait.1@0x10),
> C1(1000@1 mwait.1), PSS
> acpicpu3 at acpi0: C3(200@109 mwait.1@0x30), C2(500@80 mwait.1@0x10),
> C1(1000@1 mwait.1), PSS
> acpitz0 at acpi0: critical temperature is 107 degC
> acpivideo0 at acpi0: VID_
> acpivout0 at acpivideo0: LCD_
> acpivideo1 at acpi0: VID_
> acpivout1 at acpivideo1: LCD_
> cpu0: using VERW MDS workaround (except on vmm entry)
> cpu0: Enhanced SpeedStep 2294 MHz: speeds: 2301, 2300, 2000, 1800, 1600,
> 1400, 1200, 1000, 800 MHz
> pci0 at mainbus0 bus 0
> pchb0 at pci0 dev 0 function 0 "Intel Core 2G Host" rev 0x09
> ppb0 at pci0 dev 1 function 0 "Intel Core 2G PCIE" rev 0x09: msi
> pci1 at ppb0 bus 1
> vendor "NVIDIA", unknown product 0x0e3a (class display subclass VGA, rev
> 0xa1) at pci1 dev 0 function 0 not configured
> azalia0 at pci1 dev 0 function 1 vendor "NVIDIA", unknown product 0x0beb rev
> 0xa1: msi
> azalia0: no supported codecs
> inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics 3000" rev 0x09
> drm0 at inteldrm0
> inteldrm0: msi, SANDYBRIDGE, gen 6
> "Intel 6 Series MEI" rev 0x04 at pci0 dev 22 function 0 not configured
> puc0 at pci0 dev 22 function 3 "Intel 6 Series KT" rev 0x04: ports: 16 com
> com4 at puc0 port 0 apic 2 int 17: ns16550a, 16 byte fifo
> com4: probed fifo depth: 0 bytes
> em0 at pci0 dev 25 function 0 "Intel 82579LM" rev 0x04: msi, address
> d0:67:e5:3b:30:67
> ehci0 at pci0 dev 26 function 0 "Intel 6 Series USB" rev 0x04: apic 2 int 16
> usb0 at ehci0: USB revision 2.0
> uhub0 at usb0 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00
> addr 1
> azalia1 at pci0 dev 27 function 0 "Intel 6 Series HD Audio" rev 0x04: msi
> azalia1: codecs: IDT/0x76e7
> audio0 at azalia1
> ppb1 at pci0 dev 28 function 0 "Intel 6 Series PCIE" rev 0xb4: msi
> pci2 at ppb1 bus 2
> ppb2 at pci0 dev 28 function 1 "Intel 6 Series PCIE" rev 0xb4: msi
> pci3 at ppb2 bus 3
> iwn0 at pci3 dev 0 function 0 "Intel Centrino Ultimate-N 6300" rev 0x35: msi,
> MIMO 3T3R, MoW, address 24:77:03:07:03:10
> ppb3 at pci0 dev 28 function 2 "Intel 6 Series PCIE" rev 0xb4: msi
> pci4 at ppb3 bus 4
> re0 at pci4 dev 0 function 0 "Realtek 8168" rev 0x03: RTL8168D/8111D
> (0x2800), msi, address 00:0a:cd:24:69:46
> rgephy0 at re0 phy 7: RTL8169S/8110S/8211, rev. 2
> ppb4 at pci0 dev 28 function 3 "Intel 6 Series PCIE" rev 0xb4: msi
> pci5 at ppb4 bus 10
> xhci0 at pci5 dev 0 function 0 "NEC xHCI" rev 0x04: msix, xHCI 0.96
> usb1 at xhci0: USB revision 3.0
> uhub1 at usb1 configuration 1 interface 0 "NEC xHCI root hub" rev 3.00/1.00
> addr 1
> ppb5 at pci0 dev 28 function 7 "Intel 6 Series PCIE" rev 0xb4: msi
> pci6 at ppb5 bus 11
> vendor "O2 Micro", unknown product 0x11f7 (class serial bus subclass
> Firewire, rev 0x05) at pci6 dev 0 function 0 not configured
> sdhc0 at pci6 dev 0 function 1 vendor "O2 Micro", unknown product 0x8320 rev
> 0x05: apic 2 int 16
> sdhc0: SDHC 2.00, 50 MHz base clock
> sdmmc0 at sdhc0: 4-bit, sd high-speed, mmc high-speed, dma
> vendor "O2 Micro", unknown product 0x8330 (class mass storage subclass
> miscellaneous, rev 0x05) at pci6 dev 0 function 2 not configured
> ehci1 at pci0 dev 29 function 0 "Intel 6 Series USB" rev 0x04: apic 2 int 17
> usb2 at ehci1: USB revision 2.0
> uhub2 at usb2 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00
> addr 1
> pcib0 at pci0 dev 31 function 0 "Intel QM67 LPC" rev 0x04
> ahci0 at pci0 dev 31 function 2 "Intel 6 Series AHCI" rev 0x04: msi, AHCI 1.3
> ahci0: port 0: 3.0Gb/s
> ahci0: port 1: 3.0Gb/s
> ahci0: port 3: 1.5Gb/s
> scsibus1 at ahci0: 32 targets
> sd0 at scsibus1 targ 0 lun 0: <ATA, WDC WD7500BPKT-7, 01.0>
> naa.50014ee6ac3998b0
> sd0: 715404MB, 512 bytes/sector, 1465149168 sectors
> sd1 at scsibus1 targ 1 lun 0: <ATA, WDC WD7500BPKT-7, 01.0>
> naa.50014ee6018f0fe9
> sd1: 715404MB, 512 bytes/sector, 1465149168 sectors
> cd0 at scsibus1 targ 3 lun 0: <MATSHITA, BD-RE UJ242, 1.11> removable
> ichiic0 at pci0 dev 31 function 3 "Intel 6 Series SMBus" rev 0x04: apic 2 int
> 18
> iic0 at ichiic0
> lisa0 at iic0 addr 0x1d: lis331dl
> spdmem0 at iic0 addr 0x50: 4GB DDR3 SDRAM PC3-10600 SO-DIMM
> spdmem1 at iic0 addr 0x51: 4GB DDR3 SDRAM PC3-10600 SO-DIMM
> spdmem2 at iic0 addr 0x52: 4GB DDR3 SDRAM PC3-10600 SO-DIMM
> spdmem3 at iic0 addr 0x53: 4GB DDR3 SDRAM PC3-10600 SO-DIMM
> isa0 at pcib0
> isadma0 at isa0
> pckbc0 at isa0 port 0x60/5 irq 1 irq 12
> pckbd0 at pckbc0 (kbd slot)
> wskbd0 at pckbd0: console keyboard
> pms0 at pckbc0 (aux slot)
> wsmouse0 at pms0 mux 0
> pcppi0 at isa0 port 0x61
> spkr0 at pcppi0
> efifb at mainbus0 not configured
> uhub3 at uhub0 port 1 configuration 1 interface 0 "Intel Rate Matching Hub"
> rev 2.00/0.00 addr 2
> uhub4 at uhub3 port 1 configuration 1 interface 0 "Dell product 0x2513" rev
> 2.00/a0.05 addr 3
> uhidev0 at uhub4 port 1 configuration 1 interface 0 "Logitech USB Optical
> Mouse" rev 2.00/63.00 addr 4
> uhidev0: iclass 3/1
> ums0 at uhidev0: 3 buttons, Z dir
> wsmouse1 at ums0 mux 0
> uhidev1 at uhub4 port 3 configuration 1 interface 0 "Logitech USB Keyboard"
> rev 1.10/64.00 addr 5
> uhidev1: iclass 3/1
> ukbd0 at uhidev1: 8 variable keys, 6 key codes
> wskbd1 at ukbd0 mux 1
> uhidev2 at uhub4 port 3 configuration 1 interface 1 "Logitech USB Keyboard"
> rev 1.10/64.00 addr 5
> uhidev2: iclass 3/0, 3 report ids
> ucc0 at uhidev2 reportid 1: 2 usages, 3 keys, enum
> wskbd2 at ucc0 mux 1
> uhid0 at uhidev2 reportid 2: input=1, output=0, feature=0
> ucc1 at uhidev2 reportid 3: 21 usages, 14 keys, enum
> wskbd3 at ucc1 mux 1
> uhub5 at uhub3 port 2 configuration 1 interface 0 "Dell product 0x2513" rev
> 2.00/a0.05 addr 6
> uhub6 at uhub2 port 1 configuration 1 interface 0 "Intel Rate Matching Hub"
> rev 2.00/0.00 addr 2
> ugen0 at uhub6 port 8 "Broadcom Corp 5880" rev 1.10/1.01 addr 3
> vscsi0 at root
> scsibus2 at vscsi0: 256 targets
> softraid0 at root
> scsibus3 at softraid0: 256 targets
> root on sd1a (fa50b3edace170b1.a) swap on sd1b dump on sd1b
> inteldrm0: 1920x1080, 32bpp
> wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation), using wskbd0
> wskbd1: connecting to wsdisplay0
> wskbd2: connecting to wsdisplay0
> wskbd3: connecting to wsdisplay0
> wsdisplay0: screen 1-5 added (std, vt100 emulation)
> iwn0: radio is disabled by hardware switch
>
> --
> aer
>
>
