There are a few open coded setting of single registers using
MI_LOAD_REGISTER_IMM, replace those with a call to
brw_load_register_imm32().
Signed-off-by: Chris Wilson <ch...@chris-wilson.co.uk>
---
src/mesa/drivers/dri/i965/brw_draw.c | 6 +-----
src/mesa/drivers/dri/i965/brw_state_upload.c | 13 +++++--------
src/mesa/drivers/dri/i965/gen7_l3_state.c | 20 ++++++++------------
src/mesa/drivers/dri/i965/gen8_depth_state.c | 8 +++-----
4 files changed, 17 insertions(+), 30 deletions(-)
diff --git a/src/mesa/drivers/dri/i965/brw_draw.c
b/src/mesa/drivers/dri/i965/brw_draw.c
index 52589d0d13..b78e73516e 100644
--- a/src/mesa/drivers/dri/i965/brw_draw.c
+++ b/src/mesa/drivers/dri/i965/brw_draw.c
@@ -239,11 +239,7 @@ brw_emit_prim(struct brw_context *brw,
} else {
brw_load_register_mem32(brw, GEN7_3DPRIM_START_INSTANCE, bo,
prim->indirect_offset + 12);
- BEGIN_BATCH(3);
- OUT_BATCH(MI_LOAD_REGISTER_IMM | (3 - 2));
- OUT_BATCH(GEN7_3DPRIM_BASE_VERTEX);
- OUT_BATCH(0);
- ADVANCE_BATCH();
+ brw_load_register_imm32(brw, GEN7_3DPRIM_BASE_VERTEX, 0);
}
} else {
indirect_flag = 0;
diff --git a/src/mesa/drivers/dri/i965/brw_state_upload.c
b/src/mesa/drivers/dri/i965/brw_state_upload.c
index b689ae41f6..ea58bf02cf 100644
--- a/src/mesa/drivers/dri/i965/brw_state_upload.c
+++ b/src/mesa/drivers/dri/i965/brw_state_upload.c
@@ -399,14 +399,11 @@ brw_upload_initial_gpu_state(struct brw_context *brw)
brw_upload_invariant_state(brw);
/* Recommended optimization for Victim Cache eviction in pixel backend. */
- if (brw->gen >= 9) {
- BEGIN_BATCH(3);
- OUT_BATCH(MI_LOAD_REGISTER_IMM | (3 - 2));
- OUT_BATCH(GEN7_CACHE_MODE_1);
- OUT_BATCH(REG_MASK(GEN9_PARTIAL_RESOLVE_DISABLE_IN_VC) |
- GEN9_PARTIAL_RESOLVE_DISABLE_IN_VC);
- ADVANCE_BATCH();
- }
+ if (brw->gen >= 9)
+ brw_load_register_imm32(brw,
+ GEN7_CACHE_MODE_1,
+ REG_MASK(GEN9_PARTIAL_RESOLVE_DISABLE_IN_VC) |
+ GEN9_PARTIAL_RESOLVE_DISABLE_IN_VC);
if (brw->gen >= 8) {
gen8_emit_3dstate_sample_pattern(brw);
diff --git a/src/mesa/drivers/dri/i965/gen7_l3_state.c
b/src/mesa/drivers/dri/i965/gen7_l3_state.c
index e746b995c1..dd68f036b3 100644
--- a/src/mesa/drivers/dri/i965/gen7_l3_state.c
+++ b/src/mesa/drivers/dri/i965/gen7_l3_state.c
@@ -117,21 +117,17 @@ setup_l3_config(struct brw_context *brw, const struct
gen_l3_config *cfg)
PIPE_CONTROL_CS_STALL);
if (brw->gen >= 8) {
- assert(!cfg->n[GEN_L3P_IS] && !cfg->n[GEN_L3P_C] && !cfg->n[GEN_L3P_T]);
+ uint32_t partition;
- BEGIN_BATCH(3);
- OUT_BATCH(MI_LOAD_REGISTER_IMM | (3 - 2));
+ assert(!cfg->n[GEN_L3P_IS] && !cfg->n[GEN_L3P_C] && !cfg->n[GEN_L3P_T]);
/* Set up the L3 partitioning. */
- OUT_BATCH(GEN8_L3CNTLREG);
- OUT_BATCH((has_slm ? GEN8_L3CNTLREG_SLM_ENABLE : 0) |
- SET_FIELD(cfg->n[GEN_L3P_URB], GEN8_L3CNTLREG_URB_ALLOC) |
- SET_FIELD(cfg->n[GEN_L3P_RO], GEN8_L3CNTLREG_RO_ALLOC) |
- SET_FIELD(cfg->n[GEN_L3P_DC], GEN8_L3CNTLREG_DC_ALLOC) |
- SET_FIELD(cfg->n[GEN_L3P_ALL], GEN8_L3CNTLREG_ALL_ALLOC));
-
- ADVANCE_BATCH();
-
+ partition = has_slm ? GEN8_L3CNTLREG_SLM_ENABLE : 0;
+ partition |= SET_FIELD(cfg->n[GEN_L3P_URB], GEN8_L3CNTLREG_URB_ALLOC);
+ partition |= SET_FIELD(cfg->n[GEN_L3P_RO], GEN8_L3CNTLREG_RO_ALLOC);
+ partition |= SET_FIELD(cfg->n[GEN_L3P_DC], GEN8_L3CNTLREG_DC_ALLOC);
+ partition |= SET_FIELD(cfg->n[GEN_L3P_ALL], GEN8_L3CNTLREG_ALL_ALLOC);
+ brw_load_register_imm32(brw, GEN8_L3CNTLREG, partition);
} else {
assert(!cfg->n[GEN_L3P_ALL]);
diff --git a/src/mesa/drivers/dri/i965/gen8_depth_state.c
b/src/mesa/drivers/dri/i965/gen8_depth_state.c
index 14689f400f..71e5831cf1 100644
--- a/src/mesa/drivers/dri/i965/gen8_depth_state.c
+++ b/src/mesa/drivers/dri/i965/gen8_depth_state.c
@@ -347,11 +347,9 @@ gen8_write_pma_stall_bits(struct brw_context *brw,
uint32_t pma_stall_bits)
render_cache_flush);
/* CACHE_MODE_1 is a non-privileged register. */
- BEGIN_BATCH(3);
- OUT_BATCH(MI_LOAD_REGISTER_IMM | (3 - 2));
- OUT_BATCH(GEN7_CACHE_MODE_1);
- OUT_BATCH(GEN8_HIZ_PMA_MASK_BITS | pma_stall_bits);
- ADVANCE_BATCH();
+ brw_load_register_imm32(brw,
+ GEN7_CACHE_MODE_1,
+ GEN8_HIZ_PMA_MASK_BITS | pma_stall_bits);
/* After the LRI, a PIPE_CONTROL with both the Depth Stall and Depth Cache
* Flush bits is often necessary. We do it regardless because it's easier.
--
2.11.0
_______________________________________________
mesa-dev mailing list
mesa-dev@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/mesa-dev
