2009/1/16 Scott Wood <scottw...@freescale.com>: > Jean-Michel Hautbois wrote: >> >> OK, I just tried a make of my kernel (already compiled yesterday), and >> it generated a cuImage.mpc8272ads kernel image (which it didn't do >> yesterday). >> I don't know why this image was generated, but I tried to reboot using >> this one. > > Use uImage if you are providing a device tree from u-boot. cuImage is for > older u-boots that don't support this, though you could still try using it > on a modern u-boot with a one- or two-argument bootm command to try to > isolate the problem. > > -Scott >
Well it seems to be a (very) bad idea to use ucImage, because I cannot have my u-boot prompt after resetting my board... My LEDs are blinking (LD4 and LD 9) and my LD20 is off (when it should be on). I am blocked (without the prompt on my serial line !). JM _______________________________________________ Linuxppc-dev mailing list Linuxppc-dev@ozlabs.org https://ozlabs.org/mailman/listinfo/linuxppc-dev
