2009/1/15 Anatolij Gustschin <ag...@denx.de> > Jean-Michel Hautbois wrote: > > I just tried. I created a dtb from the file > > arch/powerpc/boot/dst/mpc8272ads.dts file. > > It is not rebboting, but handling (my "run" led is switching off). > > > > => tftp 2000000 mpc8272ads.dtb > > Using FCC1 ETHERNET device > > TFTP from server 10.0.0.1; our IP address is 10.0.0.2 > > Filename 'mpc8272ads.dtb'. > > Load address: 0x2000000 > > Loading: # > > done > > Bytes transferred = 4442 (115a hex) > > => bootm FF800000 FF980000 2000000 > > ## Booting kernel from Legacy Image at ff800000 ... > > Image Name: Linux-2.6.29-rc1-01197-g5a7b6e7- > > Image Type: PowerPC Linux Kernel Image (gzip compressed) > > Data Size: 1487167 Bytes = 1.4 MB > > Load Address: 00000000 > > Entry Point: 00000000 > > Verifying Checksum ... OK > > ## Loading init Ramdisk from Legacy Image at ff980000 ... > > Image Name: Simple Embedded Linux Framework > > Image Type: PowerPC Linux RAMDisk Image (gzip compressed) > > Data Size: 1730966 Bytes = 1.7 MB > > Load Address: 00000000 > > Entry Point: 00000000 > > Verifying Checksum ... OK > > ## Flattened Device Tree blob at 02000000 > > Booting using the fdt blob at 0x2000000 > > Uncompressing Kernel Image ... OK > > Loading Ramdisk to 039d7000, end 03b7d996 ... OK > > Loading Device Tree to 007fb000, end 007ff159 ... OK > > Unable to update property /cpus/c...@0:bus-frequency, > err=FDT_ERR_NOTFOUND > > Unable to update property /cpus/c...@0:timebase-frequency, > > err=FDT_ERR_NOTFOUND > > Unable to update property /cpus/c...@0:clock-frequency, > err=FDT_ERR_NOTFOUND > > try to fix "ft_cpu_setup()" in your u-boot source for mpc8272ads > and use "PowerPC,8...@0" as cpu_path instead of "c...@0". > > Best regards, > Anatolij >
I don't have the three errors relative to c...@0, but it still handles...
_______________________________________________ Linuxppc-dev mailing list Linuxppc-dev@ozlabs.org https://ozlabs.org/mailman/listinfo/linuxppc-dev
