On Fri, May 9, 2008 at 3:03 AM, Jason Jin <[EMAIL PROTECTED]> wrote: > Binding document adding for Freescale MSI support. > > Signed-off-by: Jason Jin <[EMAIL PROTECTED]> > --- > Updated to V2 version per Segher's suggestion. > > Documentation/powerpc/booting-without-of.txt | 40 > +++++++++++++++++++++++++- > 1 files changed, 39 insertions(+), 1 deletions(-) > > diff --git a/Documentation/powerpc/booting-without-of.txt > b/Documentation/powerpc/booting-without-of.txt > index 1d2a772..887783c 100644 > --- a/Documentation/powerpc/booting-without-of.txt > +++ b/Documentation/powerpc/booting-without-of.txt > @@ -57,7 +57,10 @@ Table of Contents > n) 4xx/Axon EMAC ethernet nodes > o) Xilinx IP cores > p) Freescale Synchronous Serial Interface > - q) USB EHCI controllers > + q) USB EHCI controllers > + r) Freescale Display Interface Unit > + s) Freescale on board FPGA > + t) Freescael MSI interrupt controller > > VII - Marvell Discovery mv64[345]6x System Controller chips > 1) The /system-controller node > @@ -2870,6 +2873,41 @@ platforms are moved over to use the > flattened-device-tree model. > reg = <0xe8000000 32>; > }; > > + t) Freescale MSI interrupt controller > + > + Reguired properities: > + - compatible : set as "fsl,86xx-MSI" for 86xx cpu, "fsl,85xx-MSI" for > 85xx > + cpu and "fsl,83xx-MSI" for 83xx cpu.
As Segher mentioned; don't use 'generic' compatible values. Use names of *actual* devices and have newer parts claim compatibility with older ones. Otherwise looks good to me. Cheers, g. -- Grant Likely, B.Sc., P.Eng. Secret Lab Technologies Ltd. _______________________________________________ Linuxppc-dev mailing list Linuxppc-dev@ozlabs.org https://ozlabs.org/mailman/listinfo/linuxppc-dev
