Hello.
Anton Vorontsov wrote:
> This patch adds localbus and pata nodes to use CF IDE interface
> on MPC8349E-mITX boards.
> Patch also adds code to probe localbus.
> Signed-off-by: Anton Vorontsov <[EMAIL PROTECTED]>
> ---
> arch/powerpc/boot/dts/mpc8349emitx.dts | 17 ++++++++++++++++-
> arch/powerpc/platforms/83xx/mpc834x_itx.c | 17 +++++++++++++++++
> 2 files changed, 33 insertions(+), 1 deletions(-)
> diff --git a/arch/powerpc/boot/dts/mpc8349emitx.dts
> b/arch/powerpc/boot/dts/mpc8349emitx.dts
> index 5072f6d..7a97068 100644
> --- a/arch/powerpc/boot/dts/mpc8349emitx.dts
> +++ b/arch/powerpc/boot/dts/mpc8349emitx.dts
> @@ -249,6 +249,21 @@
> device_type = "pci";
> };
>
> + [EMAIL PROTECTED] {
> + #address-cells = <2>;
> + #size-cells = <1>;
> + compatible = "fsl,mpc8349emitx-localbus",
Board compatible bus?
> + "fsl,mpc8349e-localbus",
> + "fsl,pq2pro-localbus";
> + reg = <e0005000 d8>;
> + ranges = <3 0 f0000000 210>;
>
> -
> + [EMAIL PROTECTED],0 {
> + compatible = "fsl,mpc8349emitx-pata", "pata-platform";
> + reg = <3 0 10 3 20c 4>;
> + ioport-shift = <1>;
Bleh... that shift again. And this is surely not a good name for a
property (where's I/O ports in your case?) -- why not call it "reg-shift"
(well, I'd call it "reg-size" or "reg-stride" myself :-)?
MBR, Sergei
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-dev
