The original bootloader (fastboot) requires board and MSM IDs in order
to boot the kernel, so these have been added. When re-using the same
files to chainload U-Boot, these compatibles are also needed to ensure
proper booting.
Signed-off-by: Paul Sajna <sajatt...@postmarketos.org>
---
arch/arm64/boot/dts/qcom/sdm845-lg-common.dtsi | 2 ++
arch/arm64/boot/dts/qcom/sdm845-lg-judyln.dts | 1 +
2 files changed, 3 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sdm845-lg-common.dtsi
b/arch/arm64/boot/dts/qcom/sdm845-lg-common.dtsi
index
1baec758c7d881026bf6001a0a305687d7a14b40..a513cd931b3a984443183ee4e8df7b0e45732630
100644
--- a/arch/arm64/boot/dts/qcom/sdm845-lg-common.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845-lg-common.dtsi
@@ -5,6 +5,7 @@
* Copyright (c) 2022, The Linux Foundation. All rights reserved.
*/
+#include <dt-bindings/arm/qcom,ids.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/leds/common.h>
#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
@@ -29,6 +30,7 @@
/ {
chassis-type = "handset";
+ qcom,msm-id = <QCOM_ID_SDM845 0x20001>;
aliases {
serial0 = &uart9;
diff --git a/arch/arm64/boot/dts/qcom/sdm845-lg-judyln.dts
b/arch/arm64/boot/dts/qcom/sdm845-lg-judyln.dts
index
8c1692f86e6ceea7b718361965e78f95d39373bb..beb1372dc6c17f5f06c2044412ee1c8165858cd1
100644
--- a/arch/arm64/boot/dts/qcom/sdm845-lg-judyln.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-lg-judyln.dts
@@ -12,6 +12,7 @@
/ {
model = "LG G7 ThinQ";
compatible = "lg,judyln", "qcom,sdm845";
+ qcom,board-id = <0x020C0008 0>;
chosen {
framebuffer@9d400000 {
--
2.51.0
