[PATCH 4/5] arm64: dts: imx8mq-sr-som: Replace deprecated phy reset properties

[Krzysztof Kozlowski]

Use preferred properties of phy node instead of deprecated
phy-reset-gpios (and others).  This avoids copying deprecated code into
future DTSes.

Signed-off-by: Krzysztof Kozlowski <k...@kernel.org>

---

Not tested on HW.
---
 arch/arm64/boot/dts/freescale/imx8mq-sr-som.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/imx8mq-sr-som.dtsi 
b/arch/arm64/boot/dts/freescale/imx8mq-sr-som.dtsi
index 602c870a7ccb..404c46671b96 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-sr-som.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mq-sr-som.dtsi
@@ -20,8 +20,6 @@
        pinctrl-0 = <&pinctrl_fec1>;
        phy-mode = "rgmii-id";
        phy-handle = <&ethphy0>;
-       phy-reset-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
-       phy-reset-duration = <2>;
        fsl,magic-packet;
        status = "okay";
 
@@ -32,6 +30,8 @@
                ethphy0: ethernet-phy@4 {
                        compatible = "ethernet-phy-ieee802.3-c22";
                        reg = <4>;
+                       reset-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
+                       reset-assert-us = <2000>;
                };
        };
 };
-- 
2.17.1