[PATCH 5/5] arm64: dts: imx8mq-thor96: Replace deprecated phy reset properties

[Krzysztof Kozlowski]

Use preferred properties of phy node instead of deprecated
phy-reset-gpios (and others).  This avoids copying deprecated code into
future DTSes.

Signed-off-by: Krzysztof Kozlowski <k...@kernel.org>

---

Not tested on HW.
---
 arch/arm64/boot/dts/freescale/imx8mq-thor96.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/freescale/imx8mq-thor96.dts 
b/arch/arm64/boot/dts/freescale/imx8mq-thor96.dts
index b4795a032fa2..5d5aa6537225 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-thor96.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mq-thor96.dts
@@ -122,7 +122,6 @@
        pinctrl-names = "default";
        pinctrl-0 = <&pinctrl_fec1>;
        phy-mode = "rgmii-id";
-       phy-reset-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
        phy-handle = <&ethphy>;
        fsl,magic-packet;
        status = "okay";
@@ -134,6 +133,7 @@
                ethphy: ethernet-phy@3 {
                        compatible = "ethernet-phy-ieee802.3-c22";
                        reg = <3>;
+                       reset-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
                };
        };
 };
-- 
2.17.1