hey, hope you're all having a happy shushan purim :)
meanwhile, i'm still not able to connect my linux box through this samsung eht-a300 modem... i'm going to retry some things suggested a couple days ago .. everyone says my settings are ok but it's not working... :< also, what was the .dat file that was attached a couple days ago? i wasn't able to decypher it... shalom, yasha harari [EMAIL PROTECTED] ps: if anyone is willing to help me on the phone (maybe to just review all should be done, etc.), i'll gladly call you wherever/whenever it's convenient for you - just let me know where/when to dial. :) > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] Behalf Of Muli Ben-Yehuda > Sent: Fri, March 14, 2003 7:38 AM > To: Meir Kriheli > Cc: [EMAIL PROTECTED] > Subject: Re: trouble with samsung ADSL modem [was: Re: my pppoe.conf > file] > > > On Mon, Mar 17, 2003 at 06:19:34PM +0200, Meir Kriheli wrote: > > > I left eth1's settings as they where from the prev adsl (pptp) > install I had, > > and it is configured and assigned an IP address at boot, yet > everything works > > as it supposed to, with no problems. > > Same here. > > I just tried connecting again, using the exact same setting as used > in previous tries, and everything worked. I can only assume that Bezeq > had a transient problem the last time I tried (after getting the > modem) and didn't bother telling me about it. > > After I satisfied myself that it works, I tried it with all of my > previous settings, including giving the NIC an IP address on boot > (which the documentation specifically warns against) and running a > DHCP server (which the modem appears to be running as well). Works for > me. > -- > Muli Ben-Yehuda > http://www.mulix.org > > ================================================================= To unsubscribe, send mail to [EMAIL PROTECTED] with the word "unsubscribe" in the message body, e.g., run the command echo unsubscribe | mail [EMAIL PROTECTED]
