After almost 20 years of using a KX-T61610 system at home, today I upgraded to a KX-TA824, along with some new KX-T7731 sets.
My main motivation for upgrading was to be able to get Caller ID / Call Waiting information at all sets. Yet this is the one feature that is not working reliably. On some calls it works; on most, it does not. I listen in with my butt set, and on most of the calls, I hear the alert tone sent, but no data is ever transmitted. I'm not familiar enough with the sounds to know if the 824 is sending its response back or not, so I don't know why the data is not being sent down the line. When I hear the data stream on the line, I do always get it at the phone. The results are the same with both my telco line and a VoIP line provided through a local ATA, so I can't blame the telco. I did set 914 to "Mode 1", the most liberal setting, but it doesn't seem to have helped much, if at all. The one thing I do notice is that it is far more likely to work when the current call was an incoming call. It never works if the current call is one I dialed. I'm open to any ideas. Thanks... _________________________________________________________________ KX-T Mailing list --- http://kxthelp.com/ Subscription changes: http://kxthelp.com/mailman/listinfo/kxt
