Larry, Have you upgraded the TD1232's to -6? They fixed a lot of sync problems after -5. I upgraded all my dual cabinet installs to -5 or -6 and have had no problems since. (also be sure you have a good UPS...)
Charles Charles Patterson Patterson Communications, Inc. Tarrytown, NY [EMAIL PROTECTED] www.pattersoncommunications.com ----- Original Message ----- From: "larry" <[EMAIL PROTECTED]> To: "KX-T Help" <kxt@kxthelp.com> Sent: Thursday, August 11, 2005 3:22 AM Subject: Re: KX-T: two dpits tvs on one kxtd? > Thanks Paul, > > the problem isn't with number of ports on the vm. > > its a problem with the dual d1232 cabinets and one tvs. when they > loose sync, the users on the slave can no longer access the tvs100 > on the master ports until the system is shut down and restarted. > > it would be great to put a second tvs100 on the slave ports. that > way when the cabinets loose sync the master users still use the > orig tvs, and the folks on the slave would be on the second tvs > on the slave ports. > > my post wasn't very good, i was doing too much "thinking out loud" > when i was composing the note. i don't think there is any solution, > i need to go thru the manuals again. i don't think i can have a tvs > port on the slave of a master/slave pair. > > i'm also considering just spliting the pair and run them separately, > each with it's own tvs. i can put two co/ext ties between the systems > so they can "intercom" each other. they will loose the use of OHCA > between systems. sure fixes the sync problem. > > actually, i can't get a tvs100, they are obsolete ;-) > > this all seemed like a good idea at the time. > > -larry > > > > 8/11/05 12:32:10 AM, "Paul H. Gusciora" <[EMAIL PROTECTED]> > wrote: > >>Larry: >> >>If you have used up all of the DPITS channels on a KX-TV100, have you >>considered upgrading to a KX-TV2yz. These have 3 slots for boards to >>connect with up to 6 DPITS ports (12 simultaneous conversations). The >>KX-TV3yz allow even more connections. >> >>BTW: The later KX-TVxyz models allow the ports to behave differently >>depending on the CO line being answered, so one does not have to >>dedicate ports to each business. You might achieve some improvement >>by upgrading the KX-TVS100 to a KX-TVS125. >> >>Paul H. Gusciora >>San Rafael, CA >> >> > > > > > _________________________________________________________________ > KX-T Mailing list --- http://kxthelp.com/ > Subscription changes: http://kxthelp.com/mailman/listinfo/kxt > > _________________________________________________________________ KX-T Mailing list --- http://kxthelp.com/ Subscription changes: http://kxthelp.com/mailman/listinfo/kxt
