Have you been programming the TVS50 with a computer? That is the only way to setup the system other than by using the default settings.
In the port section of programming you tell it which menus to go to for day or night mode. You need to set up day and night settings for both ports, then it will go to what ever menu number you tell it. Simple set up would be use custom menu 1 for day and menu 2 for night. charles ----- Original Message ----- From: "Eric Grundlehner" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Saturday, September 20, 2003 9:58 AM Subject: KX-T: FW: TVS50 & KXT123211D > Thanks for the thorough response. With your help I think we have gotten > it working for the most part. Since switching between day and night > seems to be a problem we would like to this. > > I have setup Automatic Switching on the TVS50. During night mode I would > like to play a different first prompt say "We are closed but you can > still access your parties voicemail by the following blah blah" > > Where do I record this prompts for night? > > Is there no direct mailbox access with the 123211d and tvs50. You always > have to press #6 * Mailbox even if you are calling from your own > extension. I have even tried programming a button. > > Thanks for all the help. > > Eric > > > > > > _________________________________________________________________ > KX-T Mailing list --- http://kxthelp.com/ > Subscription changes: http://kxthelp.com/mailman/listinfo/kxt > > _________________________________________________________________ KX-T Mailing list --- http://kxthelp.com/ Subscription changes: http://kxthelp.com/mailman/listinfo/kxt
