On 10/26/2020 5:28 PM, Flesner via KRnet wrote:
Here is one supplier with lots of good info.
http://www.duncanbolt.com/suppliers/marson/additional-products/klik-poly-nuts
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
The "cross section view" on the site is a bit misleading. After I
figured out the different heads on the tool are left hand threads and
installed the correct head I pulled one of the Poly-nuts without it
inserted in any material and it does look like the head will be flush
with the top surface. The "cross section view" makes it look like
there is extra material from the insert that pulls up above the
surface. That's the lighter part of the drawing that looks like a
forward C and backward C in the material.
I'll give an update when I actually use the tool and inserts.
Larry Flesne
_______________________________________________
Search the KRnet Archives at https://www.mail-archive.com/krnet@list.krnet.org/.
Please see LIST RULES and KRnet info at http://www.krnet.org/info.html.
see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change
options.
To UNsubscribe from KRnet, send a message to krnet-le...@list.krnet.org
