On 1/2/2020 1:17 PM, Mark Langford via KRnet wrote:
And even though there was no evidence of battery case damage to the
bottom, I'll put a piece of silicone padding under the next one to
spread the loads and provide a tad of vibration isolation for the
battery bottom.
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
There is a metal case available for those batteries which might be a
good option. It is a same color case that fits very tight and only
increases the size of the battery by about 1/16" on each side. The part
number followed by "MJ" indicates metal jacket.
https://www.odysseybattery.com/Batteries/Model_PC680MJ . I'm lucky and
get them at cost from the battery store where I work (hang out with pay).
Larry Flesner
_______________________________________________
Search the KRnet Archives at https://www.mail-archive.com/krnet@list.krnet.org/.
Please see LIST RULES and KRnet info at http://www.krnet.org/info.html.
see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change
options.
To UNsubscribe from KRnet, send a message to krnet-le...@list.krnet.org
