No longer wing, stick a bit shaking, but it would not drop the nose or wing. My 
test pilot stoped with 25 kts. 
Exact numbers i will report.
Stef

> Op 3 mei 2019 om 20:13 schreef Rogelio Serrano via KRnet 
> <krnet@list.krnet.org>:
> 
> 
> Congratulations!
> 
> How did you achaive the 25 kt stall speed? Longer wing?
> 
> Sent from my iPhone
> 
> > On May 4, 2019, at 01:17, Mark Langford via KRnet <krnet@list.krnet.org> 
> > wrote:
> > 
> > I didn't explain that  properly....The whole tab is 75mm wide, with 30mm
> > hanging off the surface and 30mm hanging to the aft.  A photo will help,
> > but I think you get the picture.
> > 
> > Also, springs on the elevator can excite flutter, so that I wouldn't
> > rush in that direction yet.
> > 
> > Mark Langford, Huntsville, AL
> > ML "at" N56ML.com
> > www.N56ML.com
> > 
> > 
> > 
> > _______________________________________________
> > Search the KRnet Archives at 
> > https://www.mail-archive.com/krnet@list.krnet.org/.
> > Please see LIST RULES and KRnet info at http://www.krnet.org/info.html.
> > see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change 
> > options.
> > To UNsubscribe from KRnet, send a message to krnet-le...@list.krnet.org
> 
> _______________________________________________
> Search the KRnet Archives at 
> https://www.mail-archive.com/krnet@list.krnet.org/.
> Please see LIST RULES and KRnet info at http://www.krnet.org/info.html.
> see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change 
> options.
> To UNsubscribe from KRnet, send a message to krnet-le...@list.krnet.org

Steph and his dad are building the KR-2S see 
[http://www.masttotaalconcept.nl/kr2](http://www.masttotaalconcept.nl/kr2)

_______________________________________________
Search the KRnet Archives at https://www.mail-archive.com/krnet@list.krnet.org/.
Please see LIST RULES and KRnet info at http://www.krnet.org/info.html.
see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change 
options.
To UNsubscribe from KRnet, send a message to krnet-le...@list.krnet.org

Reply via email to