Thank you, Will give it a shot. Clay -----Original Message----- From: krnet-boun...@mylist.net [mailto:krnet-boun...@mylist.net] On Behalf Of Dave Acklam Sent: Wednesday, November 28, 2012 10:10 AM To: KRnet Subject: Re: KR> retract removal
Put the plane on sawhorses Disassemble retracts Hole-saw an access hole in the end of each stub, facing out (not down) You will need the holes anyway, for access to install diehl gear Worked for me On Nov 28, 2012 9:05 AM, "Clayton" <claywil...@cox.net> wrote: > I have been searching the net, maybe I missed something. > > What is the least invasive way to remove the spring on the retract > gear set up? > > I am switching out to the Deihl conventional gear, but don't want to > tear out the entire wing stub. > > Is it best to cut the bar out in pieces or remove the bottom of the > few ribs on the stub? > > Thank you, > > Clay > > > > _______________________________________ > Search the KRnet Archives at http://tugantek.com/archmailv2-kr/search. > To UNsubscribe from KRnet, send a message to krnet-le...@mylist.net > please see other KRnet info at http://www.krnet.org/info.html > _______________________________________ Search the KRnet Archives at http://tugantek.com/archmailv2-kr/search. To UNsubscribe from KRnet, send a message to krnet-le...@mylist.net please see other KRnet info at http://www.krnet.org/info.html
