Hi Dave,

It's a KR2S and it's pretty short in the legs

Bill Weir
----- Original Message ----- 
From: "Dave Arbogast, CISSP" <k...@arb.net>
To: "KRnet" <kr...@mylist.net>
Sent: Friday, January 02, 2009 12:58 PM
Subject: Re: KR> almost check it out ride - TN


Are you building the KR2 or the KR2S ? With the S, a couple of inches
are added to the front, and another section is added to the rear of the
wing section.

You must be sure your CG is measured and in the range when you are done.

Bill Weir wrote:
> We are building a mock-up of the cockpit area to check out fit. It is 
> short
> for six foot plus grandson. Now, can we move the firewall ahead a couple
> inches? To check back, Ken Rand had the VW engine in his original KR1 
> right
> against the firewall. Was the KR1 tail heavy or when he did the KR2 did 
> the
> wider fuselage move the cg back and he was able, [or had to] move the 
> engine
> ahead? Can we put our engine against the firewall as KR1 with the firewall
> ahead? And to finish, has anyone widened the KR2S fuselage?
>
>
>
> Bill Weir
>
>
>
>
> _______________________________________
> Search the KRnet Archives at http://www.maddyhome.com/krsrch/index.jsp
> to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net
> please see other KRnet info at http://www.krnet.org/info.html
>
>
> _______________________________________
> Search the KRnet Archives at http://www.maddyhome.com/krsrch/index.jsp
> to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net
> please see other KRnet info at http://www.krnet.org/info.html
>
>
> _______________________________________
> Search the KRnet Archives at http://www.maddyhome.com/krsrch/index.jsp
> to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net
> please see other KRnet info at http://www.krnet.org/info.html
>

_______________________________________
Search the KRnet Archives at http://www.maddyhome.com/krsrch/index.jsp
to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net
please see other KRnet info at http://www.krnet.org/info.html 

Reply via email to