Here's a question for the net. I looked in the archive for info on epoxy
shelf life, but didn't find much. My concern is knowing that the epoxy is safe
to
use or not. I purchased all the materials to build my KR2 in '97 and that gave
me a lot of time for the epoxy to sit. I have completed the tail section
without too much problem, but if the resin is stored for an extended period as
is
now it crystallizes and requires slow heating to decrystalize it. I also am
needing a better more confident method of mixing the correct ratio on the Dow
system 330 from Wicks. Should I scrap the 6 remaining gallons and use something
else or just buy some new hardener or any other suggestions would be
appreciated.
>>PS Mark L., do you still have your original Type 4. I am considering
strongly using one instead of the 2180, estimated to install next summer.
Mike Simpson
Hillsborough NC
mplane...@aol.com
