Thanks for the reminder Virg. Albert
On Sat, 15 Apr 2006 22:08:13 -0400, VIRGIL N SALISBURY wrote > do not forget the washers under the nut and bolt, Virg > > On Sat, 15 Apr 2006 18:07:32 -0500 Larry&Sallie Flesner > <fles...@verizon.net> writes: > > At 04:42 PM 4/15/2006, you wrote: > > >Hi all > > >So if I chose not to use ribs ? I would need to glass the inner and > > outer > > >foam panel . > > >Albert > > +++++++++++++++++++++++++++++++++++++++++++++++++++++++ > > > > Not necessarily but use the ribs and save the weight of the extra > > glass and resin. Using the ribs will help insure a true surface > > when sanding. > > > > As to the wing attach fitting bolts, there is probably a > > recommended > > torque value for that size bolt but good and tight seems to work > > for me. On the bolts through fittings to the spar, don't crush the > > wood. > > > > Larry Flesner > > > > > > _______________________________________ > > Search the KRnet Archives at > > http://www.maddyhome.com/krsrch/index.jsp > > to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net > > please see other KRnet info at http://www.krnet.org/info.html > > > > > > Virgil N. Salisbury - AMSOIL > www.lubedealer.com/salisbury > Miami ,Fl > > _______________________________________ > Search the KRnet Archives at > http://www.maddyhome.com/krsrch/index.jsp to UNsubscribe from KRnet, > send a message to krnet-le...@mylist.net please see other KRnet info > at http://www.krnet.org/info.html ___________________________________________________ Alphalink WebMail - http://webmail.alphalink.com.au
