Peter, I have the tension springs on my rudder pedals connected from the pedal to the firewall. I have 56.2 flying hours with this set up and have had no problems. The springs keep the cables just taught enough to compensate for any cable stretch which might occur and also will center the rudder if you remove your feet from the pedals (of course air pressure would center the rudder on the pulley run around system). Personally, I prefer this over the pulley run around system. It is your choice.
Mark Jones (N886MJ) Wales, WI Visit my web site: http://mywebpage.netscape.com/n886mj Email: flyk...@wi.rr.com -----Original Message----- From: krnet-boun...@mylist.net [mailto:krnet-boun...@mylist.net]On Behalf Of Peter Drake Sent: Friday, October 07, 2005 7:53 AM To: KRnet Subject: Re: KR> Control cables Thanks for that. Have you any opions on the merits of return springs on the pedals against a cable run around? Peter Drake Hereford UK ----- Original Message ----- From: "Mark Jones" <mjo...@muellersales.com> To: "KRnet" <kr...@mylist.net> Sent: Friday, October 07, 2005 1:17 PM Subject: RE: KR> Control cables > That is correct and all the control cables are 3/32x7x19. > > Mark Jones (N886MJ) > Wales, WI > Visit my web site: http://mywebpage.netscape.com/n886mj > Email: flyk...@wi.rr.com _______________________________________ Search the KRnet Archives at http://www.maddyhome.com/krsrch/index.jsp to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net please see other KRnet info at http://www.krnet.org/info.html
