I spoke to Todd a few months ago and he told me that the difference between the Dragonfly and the KR is that you cut a different section out of the same bubble. That will give different people a little different shape depending on where they cut it.
Verify this with someone else that has actually cut one already though! Brian Kraut Engineering Alternatives, Inc. www.engalt.com -----Original Message----- From: krnet-boun...@mylist.net [mailto:krnet-boun...@mylist.net]On Behalf Of Phil Matheson Sent: Wednesday, October 13, 2004 6:13 AM To: KR builders and pilots Subject: Re: KR>fitting Todds Canopy Has any one, apart from Scott Cable finished fitting a Todd's Dragonfly Canopy to a KR2. I have looked at Mark L site and Scott Cable's, My concern is ,it seems a different shape to Mark's, Is there a difference in the two Dragron fly Canopies???? Mark's web pics seem to show is canopy flatter on top, and no where near as pointed. My Canopy just does not seem to fit across the front deck, How much does need cutting from the front, or do we just throw it on the front deck like the KR plans say and glass around it.? The front of my Canopy is very pointed, and cuts across the dash panel, if I was to fit it as is, it would block out part of the panel. Or do I just pull my finger OUT and start cutting it up? ( it did cost $900.00Aust. to get it here. Phil Matheson mathe...@dodo.com.au VH-PKR ( Phil's KR) 61 3 58833588 Australia.( Down Under) See My KR2 Building Web Page at: http://mywebpage.netscape.com/flyingkrphil/VHPKR.html See our VW Engines and Home built web page at http://www.vw-engines.com/ www.homebuilt-aviation.com/ _______________________________________ to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net please see other KRnet info at http://www.krnet.org/info.html
