Inches of pitch is calculated the same for one or more blades. I think having more blades increases the "effective" blade chord if compared to two blades.
BTW, I did my measurements at the tip per Warp instructions. Ken ----- Original Message ----- From: "Martindale Family" <johnj...@chc.net.au> To: "KRnet" <kr...@mylist.net> Sent: Thursday, August 19, 2004 7:15 AM Subject: Re: KR> Blade angles Warpdrive > Hey Ken > > How did you convert blade angles set at the tips of the 3 blade Warpdrive to > inches of pitch. Someone posted a table for two bladers a while back but > I've had no luck in obtaining same for the 3 blader. Would there be much > difference? > > John > > The Martindale Family > 29 Jane Circuit > TOORMINA NSW 2452 > AUSTRALIA > > phone: 61 2 66584767 > email: johnj...@chc.net.au > > > snip.....................It has a Continintal A65 (65 HP @ 2300 rpm) and a 3 > blade Warp Drive tapered blade > > 58" prop set at 64.5" pitch..................... > > _______________________________________ > > to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net > > please see other KRnet info at http://www.krnet.org/info.html > > > > > _______________________________________ > to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net > please see other KRnet info at http://www.krnet.org/info.html
