Thanks that is very helpful although I might be single after that! Bob ----- Original Message ----- From: Patrick Driscoll via KRnet <krnet@list.krnet.org> To: KRnet <krnet@list.krnet.org> Cc: Patrick Driscoll <patric...@usfamily.net> Sent: Tue, 24 Jan 2017 09:56:41 -0500 (EST) Subject: Re: KR> DAR inspections
If push comes to shove, your wife's iron will do the job. I have removed a 4' section from the side by using an iron. (no steam) to heat the plywood over the glue line and then prying up the wood and holding it up for a few seconds to keep it from sticking again when you move on to another area. It took about one hour to remove the side. (about 2' x 4'). Patrick Driscoll Saint Paul, MN patric...@usfamily.net www.pensbypat.com If you can read this, Thank a teacher If you are reading this in English, thank a veteran _______________________________________________ Search the KRnet Archives at http://tugantek.com/archmailv2-kr/search. Please see LIST RULES and KRnet info at http://www.krnet.org/info.html. see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change options To UNsubscribe from KRnet, send a message to krnet-le...@list.krnet.org _______________________________________________ Search the KRnet Archives at http://tugantek.com/archmailv2-kr/search. Please see LIST RULES and KRnet info at http://www.krnet.org/info.html. see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change options To UNsubscribe from KRnet, send a message to krnet-le...@list.krnet.org
