Does anybody have an ICOM IC-A200 radio installed and working in their instrument panel? I finally "finished" my panel last night and everything tested fine, except my ICOM IC-A200 radio. I spent a lot of time making sure I wired it correctly, and even used new connector pins so I wouldn't be splicing wires. I've been over every wire five times in the last 24 hours, and it still doesn't work. If somebody has a working installation and could pop this thing in their panel to see if it works, I'd appreciate it.
I'm using the mounting tray, and would assume others would too since it weighs almost nothing and makes it easily removable. So loosening the 3/32" allen screw on the face of the radio releases the radio and it slides out the front of the tray. Removal and the checkout operation should take under five minutes. Otherwise, I'll send it to ICOM for a checkout, but that will certainly cost me a lot more than just the postage, and probably more time. It would really help me troubleshoot this thing, and would quickly tell me if I need to buy another radio. See enclosed photo of the operating panel, well...everything but the radio! Total current draw is only 1.43 Amps. I'll go ahead and put it in the plane and start hooking up sensors to make some of those red X's go away, and to make forward progress for a change... Thanks, Mark Langford ML at N56ML.com website at http://www.N56ML.com -------------------------------------------------------- -------------- next part -------------- A non-text attachment was scrubbed... Name: panel.jpg Type: image/jpeg Size: 83348 bytes Desc: not available URL: <http://list.krnet.org/mailman/private/krnet_list.krnet.org/attachments/20131103/8d31c3e1/attachment.jpg>
