On Tue, Jun 16, 2015 at 10:33:35PM +0530, Singh, Gaurav K wrote:
>
>
> On 6/15/2015 4:03 PM, Daniel Vetter wrote:
> >On Sat, Jun 13, 2015 at 12:24:57PM +0530, Mohan Marimuthu, Yogesh wrote:
> >>
> >>On 5/29/2015 10:51 PM, Daniel Vetter wrote:
> >>>On Fri, May 29, 2015 at 04:07:03PM +0530, Gaurav K Singh wrote:
> >>>>During enable sequence for MIPI encoder in command mode, enable
> >>>>MIPI display self-refresh mode bit in Pipe Ctrl reg.
> >>>>
> >>>>Signed-off-by: Gaurav K Singh <gaurav.k.si...@intel.com>
> >>>>Signed-off-by: Yogesh Mohan Marimuthu <yogesh.mohan.marimu...@intel.com>
> >>>>Signed-off-by: Shobhit Kumar <shobhit.ku...@intel.com>
> >>>>---
> >>>> drivers/gpu/drm/i915/intel_display.c | 15 +++++++++++++++
> >>>> 1 file changed, 15 insertions(+)
> >>>>
> >>>>diff --git a/drivers/gpu/drm/i915/intel_display.c
> >>>>b/drivers/gpu/drm/i915/intel_display.c
> >>>>index cab2ac8..fc84313 100644
> >>>>--- a/drivers/gpu/drm/i915/intel_display.c
> >>>>+++ b/drivers/gpu/drm/i915/intel_display.c
> >>>>@@ -44,6 +44,7 @@
> >>>> #include <drm/drm_plane_helper.h>
> >>>> #include <drm/drm_rect.h>
> >>>> #include <linux/dma_remapping.h>
> >>>>+#include "intel_dsi.h"
> >>>> /* Primary plane formats supported by all gen */
> >>>> #define COMMON_PRIMARY_FORMATS \
> >>>>@@ -2110,6 +2111,8 @@ static void intel_enable_pipe(struct intel_crtc
> >>>>*crtc)
> >>>> {
> >>>> struct drm_device *dev = crtc->base.dev;
> >>>> struct drm_i915_private *dev_priv = dev->dev_private;
> >>>>+ struct intel_encoder *encoder;
> >>>>+ struct intel_dsi *intel_dsi;
> >>>> enum pipe pipe = crtc->pipe;
> >>>> enum transcoder cpu_transcoder =
> >>>> intel_pipe_to_cpu_transcoder(dev_priv,
> >>>>
> >>>> pipe);
> >>>>@@ -2154,6 +2157,18 @@ static void intel_enable_pipe(struct intel_crtc
> >>>>*crtc)
> >>>> return;
> >>>> }
> >>>>+ for_each_encoder_on_crtc(dev, &crtc->base, encoder) {
> >>>>+ if (encoder->type == INTEL_OUTPUT_DSI) {
> >>>>+ intel_dsi = enc_to_intel_dsi(&encoder->base);
> >>>>+ if (intel_dsi && (intel_dsi->operation_mode ==
> >>>>+ INTEL_DSI_COMMAND_MODE)) {
> >>>>+ val = val | PIPECONF_MIPI_DSR_ENABLE;
> >>>>+ I915_WRITE(reg, val);
> >>>>+ }
> >>>>+ break;
> >>>>+ }
> >>>>+ }
> >>>When we have these kind of encoder/crtc state depencies we resolve them by
> >>>adding a bit of state to intel_crtc_state which is set as needed in the
> >>>encoder's compute_config callback. Then all you need here is
> >>>
> >>> if (intel_state->dsi_self_refresh)
> >>> val |= PIPECONF_MIPI_DSR_ENABLE;
> >>>
> >>>Also is that additional write really required?
> >>>-Daniel
> >>Yes additional write is required. MIPI_DSR_ENABLE has to be written first
> >>then followed
> >>by pipe enable. if MIPI_DSR_ENABLE and pipe enable is done in same write,
> >>observed
> >>that the image from pipe is not sent to panel when issued mem write command.
> >>
> >>Having a state variable instead of looping through the encoders definitely
> >>looks good.
> >>Need to find a place to update the state variable. I will get back on this.
> >Like I said such state is precomputed in the encoder callbacks, in this
> >case intel_dsi_compute_config.
> >
> >Cheers, Daniel
> Agree with you daniel regarding state flag. Updated patch is ready, will
> upload shortly.
>
> Regarding additional write, as Yogesh confirmed, both the writes are
> required.
If we _must_ have that second write, then you need a POSTING_READ and a
comment to explain this. Otherwise this extra write will get refactoring
into just one eventually. Also if you really need a 2nd write I wonder why
we don't have to wait for hw somehow to process the first one?
-Daniel
--
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
