On Fri, May 29, 2015 at 04:07:03PM +0530, Gaurav K Singh wrote:
> During enable sequence for MIPI encoder in command mode, enable
> MIPI display self-refresh mode bit in Pipe Ctrl reg.
>
> Signed-off-by: Gaurav K Singh <gaurav.k.si...@intel.com>
> Signed-off-by: Yogesh Mohan Marimuthu <yogesh.mohan.marimu...@intel.com>
> Signed-off-by: Shobhit Kumar <shobhit.ku...@intel.com>
> ---
> drivers/gpu/drm/i915/intel_display.c | 15 +++++++++++++++
> 1 file changed, 15 insertions(+)
>
> diff --git a/drivers/gpu/drm/i915/intel_display.c
> b/drivers/gpu/drm/i915/intel_display.c
> index cab2ac8..fc84313 100644
> --- a/drivers/gpu/drm/i915/intel_display.c
> +++ b/drivers/gpu/drm/i915/intel_display.c
> @@ -44,6 +44,7 @@
> #include <drm/drm_plane_helper.h>
> #include <drm/drm_rect.h>
> #include <linux/dma_remapping.h>
> +#include "intel_dsi.h"
>
> /* Primary plane formats supported by all gen */
> #define COMMON_PRIMARY_FORMATS \
> @@ -2110,6 +2111,8 @@ static void intel_enable_pipe(struct intel_crtc *crtc)
> {
> struct drm_device *dev = crtc->base.dev;
> struct drm_i915_private *dev_priv = dev->dev_private;
> + struct intel_encoder *encoder;
> + struct intel_dsi *intel_dsi;
> enum pipe pipe = crtc->pipe;
> enum transcoder cpu_transcoder = intel_pipe_to_cpu_transcoder(dev_priv,
> pipe);
> @@ -2154,6 +2157,18 @@ static void intel_enable_pipe(struct intel_crtc *crtc)
> return;
> }
>
> + for_each_encoder_on_crtc(dev, &crtc->base, encoder) {
> + if (encoder->type == INTEL_OUTPUT_DSI) {
> + intel_dsi = enc_to_intel_dsi(&encoder->base);
> + if (intel_dsi && (intel_dsi->operation_mode ==
> + INTEL_DSI_COMMAND_MODE)) {
> + val = val | PIPECONF_MIPI_DSR_ENABLE;
> + I915_WRITE(reg, val);
> + }
> + break;
> + }
> + }
When we have these kind of encoder/crtc state depencies we resolve them by
adding a bit of state to intel_crtc_state which is set as needed in the
encoder's compute_config callback. Then all you need here is
if (intel_state->dsi_self_refresh)
val |= PIPECONF_MIPI_DSR_ENABLE;
Also is that additional write really required?
-Daniel
> +
> I915_WRITE(reg, val | PIPECONF_ENABLE);
> POSTING_READ(reg);
> }
> --
> 1.7.9.5
>
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/intel-gfx
--
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
