On Fri, May 04, 2012 at 05:18:16PM -0300, Paulo Zanoni wrote:
> From: Paulo Zanoni <paulo.r.zan...@intel.com>
>
> This is not documented anywhere, but it seems necessary to make the
> InfoFrames work, especially when all you have is an HDMI monitor.
>
> Some bugs get fixed just by running "./intel_infoframes -d". This
> patch fixes this problem on my machine.
>
> Signed-off-by: Paulo Zanoni <paulo.r.zan...@intel.com>
Can you elaborate a bit on which machines really need this? I fear that
we're adding a hack here which is only required on a few chips and then
keep it around forever ...
-Daniel
> ---
> drivers/gpu/drm/i915/intel_hdmi.c | 22 ++++++++++++++++++++++
> 1 file changed, 22 insertions(+)
>
> diff --git a/drivers/gpu/drm/i915/intel_hdmi.c
> b/drivers/gpu/drm/i915/intel_hdmi.c
> index 1eef50d..8646a50 100644
> --- a/drivers/gpu/drm/i915/intel_hdmi.c
> +++ b/drivers/gpu/drm/i915/intel_hdmi.c
> @@ -113,6 +113,20 @@ static u32 intel_infoframe_flags(struct dip_infoframe
> *frame)
> return flags;
> }
>
> +static u32 intel_get_dip_ctl_reg(struct drm_encoder *encoder)
> +{
> + struct drm_device *dev = encoder->dev;
> + struct intel_crtc *intel_crtc = to_intel_crtc(encoder->crtc);
> +
> + if (!HAS_PCH_SPLIT(dev)) {
> + return VIDEO_DIP_CTL;
> + } else if (IS_VALLEYVIEW(dev)) {
> + return VLV_TVIDEO_DIP_CTL(intel_crtc->pipe);
> + } else {
> + return TVIDEO_DIP_CTL(intel_crtc->pipe);
> + }
> +}
> +
> static void i9xx_write_infoframe(struct drm_encoder *encoder,
> struct dip_infoframe *frame)
> {
> @@ -331,6 +345,14 @@ static void intel_hdmi_dpms(struct drm_encoder *encoder,
> int mode)
> I915_WRITE(intel_hdmi->sdvox_reg, temp);
> POSTING_READ(intel_hdmi->sdvox_reg);
> }
> +
> + if ((mode == DRM_MODE_DPMS_ON) && encoder->crtc) {
> + /* We've just enabled the HDMI port. Now we need to touch the
> + * DIP control register to make sure the infoframes are sent.
> + */
> + u32 dip_reg = intel_get_dip_ctl_reg(encoder);
> + I915_WRITE(dip_reg, I915_READ(dip_reg));
> + }
> }
>
> static int intel_hdmi_mode_valid(struct drm_connector *connector,
> --
> 1.7.10
>
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/intel-gfx
--
Daniel Vetter
Mail: dan...@ffwll.ch
Mobile: +41 (0)79 365 57 48
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
