From: Paulo Zanoni <paulo.r.zan...@intel.com>
Gen3+ is 13 bits (12:0), and on gen2 only 12 (11:0). For both the high
bits are marked reserved, read-only so continue to mask them. Bit 31
is not reserved and has a meaning.
Signed-off-by: Paulo Zanoni <paulo.r.zan...@intel.com>
Reviewed-by: Chris Wilson <ch...@chris-wilson.co.uk>
---
drivers/gpu/drm/i915/i915_reg.h | 3 ++-
drivers/gpu/drm/i915/intel_display.c | 11 ++++++++---
2 files changed, 10 insertions(+), 4 deletions(-)
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 7bc407a..8da0b40 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -2475,7 +2475,8 @@
/* Pipe A */
#define _PIPEADSL 0x70000
-#define DSL_LINEMASK 0x00000fff
+#define DSL_LINEMASK_GEN2 0x00000fff
+#define DSL_LINEMASK_GEN3 0x00001fff
#define _PIPEACONF 0x70008
#define PIPECONF_ENABLE (1<<31)
#define PIPECONF_DISABLE 0
diff --git a/drivers/gpu/drm/i915/intel_display.c
b/drivers/gpu/drm/i915/intel_display.c
index e1716be..613f871 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -871,15 +871,20 @@ void intel_wait_for_pipe_off(struct drm_device *dev, int
pipe)
100))
DRM_DEBUG_KMS("pipe_off wait timed out\n");
} else {
- u32 last_line;
+ u32 last_line, line_mask;
int reg = PIPEDSL(pipe);
unsigned long timeout = jiffies + msecs_to_jiffies(100);
+ if (IS_GEN2(dev))
+ line_mask = DSL_LINEMASK_GEN2;
+ else
+ line_mask = DSL_LINEMASK_GEN3;
+
/* Wait for the display line to settle */
do {
- last_line = I915_READ(reg) & DSL_LINEMASK;
+ last_line = I915_READ(reg) & line_mask;
mdelay(5);
- } while (((I915_READ(reg) & DSL_LINEMASK) != last_line) &&
+ } while (((I915_READ(reg) & line_mask) != last_line) &&
time_after(timeout, jiffies));
if (time_after(jiffies, timeout))
DRM_DEBUG_KMS("pipe_off wait timed out\n");
--
1.7.10
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
