From: Paulo Zanoni <paulo.r.zan...@intel.com>
intel_wait_for_vblank uses PIPESTAT, which does not exist on Ironlake
and newer, so now we use PIPEFRAME.
There's also a check to see if the pipe is stopped.
Signed-off-by: Paulo Zanoni <paulo.r.zan...@intel.com>
---
drivers/gpu/drm/i915/intel_display.c | 21 +++++++++++++++++++++
1 file changed, 21 insertions(+)
diff --git a/drivers/gpu/drm/i915/intel_display.c
b/drivers/gpu/drm/i915/intel_display.c
index 613f871..5036efe 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -806,6 +806,22 @@ intel_find_pll_g4x_dp(const intel_limit_t *limit, struct
drm_crtc *crtc,
return true;
}
+static void ironlake_wait_for_vblank(struct drm_device *dev, int pipe)
+{
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ u32 frame, frame_reg = PIPEFRAME(pipe);
+ u32 pipeconf = I915_READ(PIPECONF(pipe));
+
+ if (!((pipeconf & PIPECONF_ENABLE) &&
+ (pipeconf & I965_PIPECONF_ACTIVE)))
+ return;
+
+ frame = I915_READ(frame_reg);
+
+ if (wait_for(I915_READ_NOTRACE(frame_reg) != frame, 50))
+ DRM_DEBUG_KMS("vblank wait timed out\n");
+}
+
/**
* intel_wait_for_vblank - wait for vblank on a given pipe
* @dev: drm device
@@ -819,6 +835,11 @@ void intel_wait_for_vblank(struct drm_device *dev, int
pipe)
struct drm_i915_private *dev_priv = dev->dev_private;
int pipestat_reg = PIPESTAT(pipe);
+ if (INTEL_INFO(dev)->gen >= 5) {
+ ironlake_wait_for_vblank(dev, pipe);
+ return;
+ }
+
/* Clear existing vblank status. Note this will clear any other
* sticky status fields as well.
*
--
1.7.10
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
