No, it is not. PSF is a separately licensed product. So is InfoPrint. Matthew
On Fri, 28 Nov 2025 21:54:25 +0000, Seymour J Metz <[email protected]> wrote: >Isn't PSF a component of InfoPrint? Do you need PMF to build libraries? > >-- >Shmuel (Seymour J.) Metz >http://mason.gmu.edu/~smetz3 >עַם יִשְׂרָאֵל חַי >נֵ֣צַח יִשְׂרָאֵ֔ל לֹ֥א יְשַׁקֵּ֖ר > > > > >________________________________________ >From: IBM Mainframe Discussion List <[email protected]> on behalf of >Matthew Stitt <[email protected]> >Sent: Friday, November 28, 2025 3:30 PM >To: [email protected] <[email protected]> >Subject: Re: Infoprint 4000 > > >External Message: Us CCaution > > >One place I worked got one. It was quite large, fast, and used TCP/IP. We >did not have PSF and used InfoPrint to send stuff to it from JES2. Worked >great for large print jobs. With InfoPrint we could send control commands, >like two sided printing, etc. > >BTW.. With InfoPrint, every printer in the company with an IP address was >connectable to z/OS JES2. NetSpool intercepted CICS print also, > >Matthew > >On Fri, 28 Nov 2025 05:01:39 +0000, ����� �� ��� <[email protected]> >wrote: > >>Hi, >>We had one of these beasts. >>As far as I can rcaall, there is a problem with the availability of the >>consumables (toner and other things), >>You also have to have special ventilation because it produces a lot of waste. >> >> >>In order to use it with z/OS, you need PSF. >>It can be connected using FICON or TCP/IP. >>I always preferred TCP/IP since it's easier to set up. >> >>Gadi >> >>________________________________ >>From: IBM Mainframe Discussion List <[email protected]> on behalf of >>Enzo Damato <[email protected]> >>Sent: Thursday, November 27, 2025 15:52 >>To: [email protected] <[email protected]> >>Subject: Infoprint 4000 >> >>Hi all, >> >>I'm looking at getting a channel-attach Infoprint 4000 for my lab/shop, >>but I haven't been able to find much information about their use and >>configuration online, and z/OS printing isn't my strongest area. I know >>that these are really intended for bulk printing of forms and similar >>things, but I want to use it as a HASP spool printer - like a really >>fast 1403 - to print job output. I was hoping that someone who might >>have a bit more experience with one of these machines might be able to >>give me any warnings I should have about this model, along with some >>background about what the software setup and configuration is like. >> >>Thank you, >> >>Enzo Damato ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [email protected] with the message: INFO IBM-MAIN
