Water is wet. The question is what that monoplex LPAR uses, but what the rest of the CEC uses.
-- Shmuel (Seymour J.) Metz http://mason.gmu.edu/~smetz3 עַם יִשְׂרָאֵל חַי נֵ֣צַח יִשְׂרָאֵ֔ל לֹ֥א יְשַׁקֵּ֖ר ________________________________________ From: IBM Mainframe Discussion List <[email protected]> on behalf of Allan Staller <[email protected]> Sent: Thursday, June 20, 2024 9:37 AM To: [email protected] Subject: Re: GRS in MONOPLEX without physical CTCs ? Classification: Confidential In a monoplex, by definition, CTC and/or CF structure are not used and unnecessary. What does the response to message indicate? Sound like either GRS=TRYJOIN and/or PLEXCFG is not MONOPLEX GSYS1.PARMLIB(IEASYS00) GRS= PLEXCFG= SYS1.PARMLIB(RSRNL*) SYS1.PARMLIB(GRSCNF*) HTH, -----Original Message----- From: IBM Mainframe Discussion List <[email protected]> On Behalf Of Seymour J Metz Sent: Thursday, June 20, 2024 8:19 AM To: [email protected] Subject: Re: GRS in MONOPLEX without physical CTCs ? [CAUTION: This Email is from outside the Organization. Unless you trust the sender, Don’t click links or open attachments as it may be a Phishing email, which can steal your Information and compromise your Computer.] The OP might have a CF LPAR for other z/OS instances, even though the monoplex doesn't use it. Def: momoplex: multiple Nepales dumplings connected with coupling facilities -- Shmuel (Seymour J.) Metz http://mason.gmu.edu/~smetz3 עַם יִשְׂרָאֵל חַי נֵ֣צַח יִשְׂרָאֵ֔ל לֹ֥א יְשַׁקֵּ֖ר ________________________________________ From: IBM Mainframe Discussion List <[email protected]> on behalf of Mark Jacobs <[email protected]> Sent: Thursday, June 20, 2024 9:05 AM To: [email protected] Subject: Re: GRS in MONOPLEX without physical CTCs ? Being in a monoplex I assume no. Mark Jacobs Sent from ProtonMail, Swiss-based encrypted email. GPG Public Key - https://api.protonmail.ch/pks/lookup?op=get&[email protected] On Thursday, June 20th, 2024 at 9:04 AM, Seymour J Metz <[email protected]> wrote: > Do you have a CF LPAR? > > -- > Shmuel (Seymour J.) Metz > http://mason/ > .gmu.edu%2F~smetz3&data=05%7C02%7Callan.staller%40hcltech.com%7C2859c2 > cee51040d494f208dc912ba589%7C189de737c93a4f5a8b686f4ca9941912%7C0%7C0% > 7C638544863870347138%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQI > joiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C0%7C%7C%7C&sdata=XczQo3LOL > 9tWOKXve5vhroEIFqOXs%2FXniGK%2BhLbmcHg%3D&reserved=0 > עַם יִשְׂרָאֵל חַי > נֵ֣צַח יִשְׂרָאֵ֔ל לֹ֥א יְשַׁקֵּ֖ר > > ________________________________________ > From: IBM Mainframe Discussion List [email protected] on behalf > of MANCINI Frédéric (80) [email protected] > > Sent: Thursday, June 20, 2024 8:29 AM > To: [email protected] > Subject: GRS in MONOPLEX without physical CTCs ? > > Hello, > > We recently acquired TACM (Tivoli Adanced Catalog Management). > > To use its "MERGECAT WHILE-OPEN" functionality, we would have to > properly configure GRS (we presently have GRS=NONE in IEASYSxx). > > I set GRS=START and GRSRNL=00 in IEASYSxx, but when I IPL the system I > get the following message : > > ISG157D SYSTEM IN MONOPLEX MODE WITH NO GRS CTC DEFINITIONS. RELOAD > THE SYSTEM OR REPLY NONE TO CONTINUE THE IPL. > > Is it possible to configure GRS on a MONOPLEX without physical CTCs ? > > Regards, > > Frederic Mancini > > ---------------------------------------------------------------------- > For IBM-MAIN subscribe / signoff / archive access instructions, send > email to [email protected] with the message: INFO IBM-MAIN > > > ---------------------------------------------------------------------- > For IBM-MAIN subscribe / signoff / archive access instructions, send > email to [email protected] with the message: INFO IBM-MAIN ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [email protected] with the message: INFO IBM-MAIN ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [email protected] with the message: INFO IBM-MAIN ::DISCLAIMER:: ________________________________ The contents of this e-mail and any attachment(s) are confidential and intended for the named recipient(s) only. E-mail transmission is not guaranteed to be secure or error-free as information could be intercepted, corrupted, lost, destroyed, arrive late or incomplete, or may contain viruses in transmission. The e mail and its contents (with or without referred errors) shall therefore not attach any liability on the originator or HCL or its affiliates. Views or opinions, if any, presented in this email are solely those of the author and may not necessarily reflect the views or opinions of HCL or its affiliates. Any form of reproduction, dissemination, copying, disclosure, modification, distribution and / or publication of this message without the prior written consent of authorized representative of HCL is strictly prohibited. If you have received this email in error please delete it and notify the sender immediately. Before opening any email and/or attachments, please check them for viruses and other defects. ________________________________ ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [email protected] with the message: INFO IBM-MAIN ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [email protected] with the message: INFO IBM-MAIN
