sim... voces tem alguma configuracao de master e slave? nao estou entendendo como configurar no rc.conf e no freevrrpd.conf
veja abaixo >*> MASTER* >*> ifconfig_em1="up"* >*>* >*> /usr/local/etc/freevrrpd.conf* >*>* >*> [VRID]* >*> serverid = 1* >*> interface = em1* >*> priority = 101* >*> addr = 192.168.50.49/30* >*> password = vrid1* >*>* >*>* >*> SLAVE* >*> ifconfig_em1="up"* >*>* >*> /usr/local/etc/freevrrpd.conf* >*>* >*> [VRID]* >*> serverid = 1* >*> interface = em1* >*> priority = 100* >*> addr = 192.168.50.49/30* >*> password = vrid1* Em 17 de abril de 2012 16:53, Alisson <alissongoncal...@bsd.com.br>escreveu: > pessoal. > > voces tem alguma configuração do freevrrpd de um servidor master e um > servidor slave? > > dessa vez ao iniciar o freevrrpd todas as interfaces ficaram caindo, > parecia algum loop > > e aparecia essa mensagem > interface is faulty deactivated from vrrp vrid > > > Em 13 de abril de 2012 15:25, Alisson <alissongoncal...@bsd.com.br>escreveu: > > Boa tarde Luiz Gustavo, >> >> eu tenho uma interface em outra rede: >> >> ifconfig_em0="192.168.50.46/25" >> >> Em 13 de abril de 2012 09:32, Alisson <alissongoncal...@bsd.com.br>escreveu: >> >> ok.. >>> >>> eu nao estava entendendo como fazer as configurações no rc.conf >>> ai ficou assim >>> >>> >>> MASTER >>> ifconfig_em1="up" >>> >>> /usr/local/etc/freevrrpd.conf >>> >>> [VRID] >>> serverid = 1 >>> interface = em1 >>> priority = 101 >>> addr = 192.168.50.49/30 >>> password = vrid1 >>> >>> >>> SLAVE >>> ifconfig_em1="up" >>> >>> /usr/local/etc/freevrrpd.conf >>> >>> [VRID] >>> serverid = 1 >>> interface = em1 >>> priority = 100 >>> addr = 192.168.50.49/30 >>> password = vrid1 >>> >>> >>> /var/log/messages >>> >>> Apr 12 18:09:45 master freevrrpd[2024]: launching daemon in background >>> mode >>> Apr 12 18:09:45 master freevrrpd[2025]: initializing threads and all VRID >>> Apr 12 18:09:45 master freevrrpd[2025]: reading configuration file >>> /usr/local/etc/freevrrpd.conf >>> Apr 12 18:09:45 master freevrrpd[2025]: no IP address is configured on >>> the real interface em1 >>> Apr 12 18:09:45 master freevrrpd[2025]: cannot join multicast vrrp group >>> without a real ip adress on em1 >>> Apr 12 18:09:45 master freevrrpd[2025]: choose an IP address that is not >>> used on any VRIDs and restart >>> Apr 12 18:09:45 master freevrrpd[2025]: you can set a private address >>> for announcing VRRP packets (eg: 192.168.0.1/24) >>> Apr 12 18:09:45 master freevrrpd[2025]: exiting... >>> >>> >>> Em 12 de abril de 2012 19:15, Alisson <alissongoncal...@bsd.com.br>escreveu: >>> >>> ok.. >>>> >>>> eu nao estava entendendo como fazer as configurações no rc.conf >>>> ai ficou assim >>>> >>>> >>>> MASTER >>>> ifconfig_em1="up" >>>> >>>> /usr/local/etc/freevrrpd.conf >>>> >>>> [VRID] >>>> serverid = 1 >>>> interface = em1 >>>> priority = 101 >>>> addr = 192.168.50.49/30 >>>> password = vrid1 >>>> >>>> >>>> SLAVE >>>> ifconfig_em1="up" >>>> >>>> /usr/local/etc/freevrrpd.conf >>>> >>>> [VRID] >>>> serverid = 1 >>>> interface = em1 >>>> priority = 100 >>>> addr = 192.168.50.49/30 >>>> password = vrid1 >>>> >>>> >>>> /var/log/messages >>>> >>>> Apr 12 18:09:45 master freevrrpd[2024]: launching daemon in background >>>> mode >>>> Apr 12 18:09:45 master freevrrpd[2025]: initializing threads and all >>>> VRID >>>> Apr 12 18:09:45 master freevrrpd[2025]: reading configuration file >>>> /usr/local/etc/freevrrpd.conf >>>> Apr 12 18:09:45 master freevrrpd[2025]: no IP address is configured on >>>> the real interface em1 >>>> Apr 12 18:09:45 master freevrrpd[2025]: cannot join multicast vrrp >>>> group without a real ip adress on em1 >>>> Apr 12 18:09:45 master freevrrpd[2025]: choose an IP address that is >>>> not used on any VRIDs and restart >>>> Apr 12 18:09:45 master freevrrpd[2025]: you can set a private address >>>> for announcing VRRP packets (eg: 192.168.0.1/24) >>>> Apr 12 18:09:45 master freevrrpd[2025]: exiting... >>>> >>>> >>>> >>>> Em 12 de abril de 2012 13:15, Alisson >>>> <alissongoncal...@bsd.com.br>escreveu: >>>> >>>> seguindo a orientação de voces... fiz algumas alterações e instalei o >>>>> freevrrp para os /30 >>>>> >>>>> veja como ficou no rc.conf do MASTER >>>>> >>>>> ipv4_addrs_em0="192.168.1.44/25" >>>>> ipv4_addrs_em1="192.168.2.48/30" >>>>> >>>>> /usr/local/etc/freevrrpd.conf >>>>> >>>>> #MASTER >>>>> [VRID] >>>>> serverid = 1 >>>>> interface = em1 >>>>> priority = 101 >>>>> addr = 192.168.2.49/30 >>>>> password = vrid1 >>>>> >>>>> veja como ficou no rc.conf do SLAVE >>>>> >>>>> ipv4_addrs_em0="192.168.1.45/25" >>>>> ipv4_addrs_em1="192.168.2.48/30" >>>>> >>>>> /usr/local/etc/freevrrpd.conf >>>>> >>>>> #SLAVE >>>>> [VRID] >>>>> serverid = 1 >>>>> interface = em1 >>>>> priority = 100 >>>>> addr = 192.168.2.49/30 >>>>> password = vrid1 >>>>> >>>>> e veja o erro do messages >>>>> >>>>> Apr 12 12:10:55 master freevrrpd[4490]: initializing threads and all >>>>> VRID >>>>> Apr 12 12:10:55 master freevrrpd[4490]: reading configuration file >>>>> /usr/local/etc/freevrrpd.conf >>>>> Apr 12 12:10:55 master freevrrpd[4490]: cannot create an eiface/ether >>>>> netgraph interface: Address already in use >>>>> Apr 12 12:10:55 master kernel: ngeth5: link state changed to UP >>>>> Apr 12 12:10:55 master kernel: ngeth5: link state changed to DOWN >>>>> Apr 12 12:10:55 master freevrrpd[4490]: ng_ether.ko is probably not >>>>> loaded, use kldload ng_ether.ko before running freevrrpd >>>>> Apr 12 12:10:55 master freevrrpd[4490]: cannot create a virtual >>>>> interface via netgraph: Address already in use >>>>> Apr 12 12:10:55 master freevrrpd[4490]: check that ng_socket, >>>>> ng_ether, ng_eiface and ng_bridge are loaded >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> Em 11 de abril de 2012 10:27, Luiz Gustavo < >>>>> luizgust...@luizgustavo.pro.br> escreveu: >>>>> >>>>> On Wed, 11 Apr 2012 09:59:34 -0300 >>>>>> Alisson <alissongoncal...@bsd.com.br> wrote: >>>>>> >>>>>> > isso que eu temia... >>>>>> > >>>>>> > entao quer dizer que se voce entrega um /30 para fazer um ponto a >>>>>> ponto >>>>>> > para um cliente >>>>>> > >>>>>> > voce tera que entregar um /29 >>>>>> > >>>>>> > nao tem outro jeito no FreeBSD? >>>>>> > >>>>>> >>>>>> [root@desktop] /usr/ports# cat net/freevrrpd/pkg-descr >>>>>> freevrrpd is a VRRP (Virtual Router Redundancy Protocol) >>>>>> implementation >>>>>> daemon under FreeBSD, NetBSD and OpenBSD. >>>>>> This daemon has been rewritten from scratch and is not based on >>>>>> existing projects. In this second public release, you can find: >>>>>> >>>>>> * A daemon RFC 2338 Compliant adapted on FreeBSD systems >>>>>> * Implementation of Virtual Adresses >>>>>> * Support for multiples VRID >>>>>> * Master announce state by sending multicast packets via BPF >>>>>> * Changing routes and IP in 3 seconds >>>>>> * Doing gratuitous ARP requests to clean the cache of all hosts >>>>>> * Election between different slave servers >>>>>> * Same host can be Slave and Master at the same time >>>>>> * Automatic Downgrade to Slave if a Master is up again >>>>>> * Anti-Address Conflict system >>>>>> * Multi-threaded vrrp daemon >>>>>> * Plain text password authentication >>>>>> * Using now only one BPF device for all VRID >>>>>> * Support netmask for Virtual IP addresses >>>>>> * Support for monitored circuit and dependances between VRIDs >>>>>> * Support for VLAN pseudo devices under *BSD >>>>>> >>>>>> -- >>>>>> --- >>>>>> Luiz Gustavo Costa (Powered by BSD) >>>>>> *+*+*+*+*+*+*+*+*+*+*+*+*+*+*+*+*+*+*+*+*+*+*+*+*+ >>>>>> mundoUnix - Consultoria em Software Livre >>>>>> http://www.mundounix.com.br >>>>>> ICQ: 2890831 / MSN: cont...@mundounix.com.br >>>>>> Tel: 55 (21) 4063-7110 / 8194-1905 / (11) 4063-0407 >>>>>> Blog: http://www.luizgustavo.pro.br >>>>>> >>>>> >>>>> >>>> >>> >> > ------------------------- Histórico: http://www.fug.com.br/historico/html/freebsd/ Sair da lista: https://www.fug.com.br/mailman/listinfo/freebsd
