Coloca uma rede diferente entre as duas interfaces, somente para se comunicarem (ele faz broadcast).
On Fri, 13 Apr 2012 09:32:31 -0300 Alisson <alissongoncal...@bsd.com.br> wrote: > ok.. > > eu nao estava entendendo como fazer as configurações no rc.conf > ai ficou assim > > > MASTER > ifconfig_em1="up" > > /usr/local/etc/freevrrpd.conf > > [VRID] > serverid = 1 > interface = em1 > priority = 101 > addr = 192.168.50.49/30 > password = vrid1 > > > SLAVE > ifconfig_em1="up" > > /usr/local/etc/freevrrpd.conf > > [VRID] > serverid = 1 > interface = em1 > priority = 100 > addr = 192.168.50.49/30 > password = vrid1 > > > /var/log/messages > > Apr 12 18:09:45 master freevrrpd[2024]: launching daemon in background mode > Apr 12 18:09:45 master freevrrpd[2025]: initializing threads and all VRID > Apr 12 18:09:45 master freevrrpd[2025]: reading configuration file > /usr/local/etc/freevrrpd.conf > Apr 12 18:09:45 master freevrrpd[2025]: no IP address is configured on the > real interface em1 > Apr 12 18:09:45 master freevrrpd[2025]: cannot join multicast vrrp group > without a real ip adress on em1 > Apr 12 18:09:45 master freevrrpd[2025]: choose an IP address that is not > used on any VRIDs and restart > Apr 12 18:09:45 master freevrrpd[2025]: you can set a private address for > announcing VRRP packets (eg: 192.168.0.1/24) > Apr 12 18:09:45 master freevrrpd[2025]: exiting... > > > Em 12 de abril de 2012 19:15, Alisson <alissongoncal...@bsd.com.br>escreveu: > > > ok.. > > > > eu nao estava entendendo como fazer as configurações no rc.conf > > ai ficou assim > > > > > > MASTER > > ifconfig_em1="up" > > > > /usr/local/etc/freevrrpd.conf > > > > [VRID] > > serverid = 1 > > interface = em1 > > priority = 101 > > addr = 192.168.50.49/30 > > password = vrid1 > > > > > > SLAVE > > ifconfig_em1="up" > > > > /usr/local/etc/freevrrpd.conf > > > > [VRID] > > serverid = 1 > > interface = em1 > > priority = 100 > > addr = 192.168.50.49/30 > > password = vrid1 > > > > > > /var/log/messages > > > > Apr 12 18:09:45 master freevrrpd[2024]: launching daemon in background mode > > Apr 12 18:09:45 master freevrrpd[2025]: initializing threads and all VRID > > Apr 12 18:09:45 master freevrrpd[2025]: reading configuration file > > /usr/local/etc/freevrrpd.conf > > Apr 12 18:09:45 master freevrrpd[2025]: no IP address is configured on the > > real interface em1 > > Apr 12 18:09:45 master freevrrpd[2025]: cannot join multicast vrrp group > > without a real ip adress on em1 > > Apr 12 18:09:45 master freevrrpd[2025]: choose an IP address that is not > > used on any VRIDs and restart > > Apr 12 18:09:45 master freevrrpd[2025]: you can set a private address for > > announcing VRRP packets (eg: 192.168.0.1/24) > > Apr 12 18:09:45 master freevrrpd[2025]: exiting... > > > > > > > > Em 12 de abril de 2012 13:15, Alisson <alissongoncal...@bsd.com.br>escreveu: > > > > seguindo a orientação de voces... fiz algumas alterações e instalei o > >> freevrrp para os /30 > >> > >> veja como ficou no rc.conf do MASTER > >> > >> ipv4_addrs_em0="192.168.1.44/25" > >> ipv4_addrs_em1="192.168.2.48/30" > >> > >> /usr/local/etc/freevrrpd.conf > >> > >> #MASTER > >> [VRID] > >> serverid = 1 > >> interface = em1 > >> priority = 101 > >> addr = 192.168.2.49/30 > >> password = vrid1 > >> > >> veja como ficou no rc.conf do SLAVE > >> > >> ipv4_addrs_em0="192.168.1.45/25" > >> ipv4_addrs_em1="192.168.2.48/30" > >> > >> /usr/local/etc/freevrrpd.conf > >> > >> #SLAVE > >> [VRID] > >> serverid = 1 > >> interface = em1 > >> priority = 100 > >> addr = 192.168.2.49/30 > >> password = vrid1 > >> > >> e veja o erro do messages > >> > >> Apr 12 12:10:55 master freevrrpd[4490]: initializing threads and all VRID > >> Apr 12 12:10:55 master freevrrpd[4490]: reading configuration file > >> /usr/local/etc/freevrrpd.conf > >> Apr 12 12:10:55 master freevrrpd[4490]: cannot create an eiface/ether > >> netgraph interface: Address already in use > >> Apr 12 12:10:55 master kernel: ngeth5: link state changed to UP > >> Apr 12 12:10:55 master kernel: ngeth5: link state changed to DOWN > >> Apr 12 12:10:55 master freevrrpd[4490]: ng_ether.ko is probably not > >> loaded, use kldload ng_ether.ko before running freevrrpd > >> Apr 12 12:10:55 master freevrrpd[4490]: cannot create a virtual > >> interface via netgraph: Address already in use > >> Apr 12 12:10:55 master freevrrpd[4490]: check that ng_socket, ng_ether, > >> ng_eiface and ng_bridge are loaded > >> > >> > >> > >> > >> > >> > >> > >> Em 11 de abril de 2012 10:27, Luiz Gustavo < > >> luizgust...@luizgustavo.pro.br> escreveu: > >> > >> On Wed, 11 Apr 2012 09:59:34 -0300 > >>> Alisson <alissongoncal...@bsd.com.br> wrote: > >>> > >>> > isso que eu temia... > >>> > > >>> > entao quer dizer que se voce entrega um /30 para fazer um ponto a ponto > >>> > para um cliente > >>> > > >>> > voce tera que entregar um /29 > >>> > > >>> > nao tem outro jeito no FreeBSD? > >>> > > >>> > >>> [root@desktop] /usr/ports# cat net/freevrrpd/pkg-descr > >>> freevrrpd is a VRRP (Virtual Router Redundancy Protocol) implementation > >>> daemon under FreeBSD, NetBSD and OpenBSD. > >>> This daemon has been rewritten from scratch and is not based on > >>> existing projects. In this second public release, you can find: > >>> > >>> * A daemon RFC 2338 Compliant adapted on FreeBSD systems > >>> * Implementation of Virtual Adresses > >>> * Support for multiples VRID > >>> * Master announce state by sending multicast packets via BPF > >>> * Changing routes and IP in 3 seconds > >>> * Doing gratuitous ARP requests to clean the cache of all hosts > >>> * Election between different slave servers > >>> * Same host can be Slave and Master at the same time > >>> * Automatic Downgrade to Slave if a Master is up again > >>> * Anti-Address Conflict system > >>> * Multi-threaded vrrp daemon > >>> * Plain text password authentication > >>> * Using now only one BPF device for all VRID > >>> * Support netmask for Virtual IP addresses > >>> * Support for monitored circuit and dependances between VRIDs > >>> * Support for VLAN pseudo devices under *BSD > >>> > >>> -- > >>> --- > >>> Luiz Gustavo Costa (Powered by BSD) > >>> *+*+*+*+*+*+*+*+*+*+*+*+*+*+*+*+*+*+*+*+*+*+*+*+*+ > >>> mundoUnix - Consultoria em Software Livre > >>> http://www.mundounix.com.br > >>> ICQ: 2890831 / MSN: cont...@mundounix.com.br > >>> Tel: 55 (21) 4063-7110 / 8194-1905 / (11) 4063-0407 > >>> Blog: http://www.luizgustavo.pro.br > >>> > >> > >> > > > ------------------------- > Histórico: http://www.fug.com.br/historico/html/freebsd/ > Sair da lista: https://www.fug.com.br/mailman/listinfo/freebsd -- --- Luiz Gustavo Costa (Powered by BSD) *+*+*+*+*+*+*+*+*+*+*+*+*+*+*+*+*+*+*+*+*+*+*+*+*+ mundoUnix - Consultoria em Software Livre http://www.mundounix.com.br ICQ: 2890831 / MSN: cont...@mundounix.com.br Tel: 55 (21) 4063-7110 / 8194-1905 / (11) 4063-0407 Blog: http://www.luizgustavo.pro.br ------------------------- Histórico: http://www.fug.com.br/historico/html/freebsd/ Sair da lista: https://www.fug.com.br/mailman/listinfo/freebsd
