Boa tarde Luiz Gustavo, eu tenho uma interface em outra rede:
ifconfig_em0="192.168.50.46/25" Em 13 de abril de 2012 09:32, Alisson <alissongoncal...@bsd.com.br>escreveu: > ok.. > > eu nao estava entendendo como fazer as configurações no rc.conf > ai ficou assim > > > MASTER > ifconfig_em1="up" > > /usr/local/etc/freevrrpd.conf > > [VRID] > serverid = 1 > interface = em1 > priority = 101 > addr = 192.168.50.49/30 > password = vrid1 > > > SLAVE > ifconfig_em1="up" > > /usr/local/etc/freevrrpd.conf > > [VRID] > serverid = 1 > interface = em1 > priority = 100 > addr = 192.168.50.49/30 > password = vrid1 > > > /var/log/messages > > Apr 12 18:09:45 master freevrrpd[2024]: launching daemon in background mode > Apr 12 18:09:45 master freevrrpd[2025]: initializing threads and all VRID > Apr 12 18:09:45 master freevrrpd[2025]: reading configuration file > /usr/local/etc/freevrrpd.conf > Apr 12 18:09:45 master freevrrpd[2025]: no IP address is configured on the > real interface em1 > Apr 12 18:09:45 master freevrrpd[2025]: cannot join multicast vrrp group > without a real ip adress on em1 > Apr 12 18:09:45 master freevrrpd[2025]: choose an IP address that is not > used on any VRIDs and restart > Apr 12 18:09:45 master freevrrpd[2025]: you can set a private address for > announcing VRRP packets (eg: 192.168.0.1/24) > Apr 12 18:09:45 master freevrrpd[2025]: exiting... > > > Em 12 de abril de 2012 19:15, Alisson <alissongoncal...@bsd.com.br>escreveu: > > ok.. >> >> eu nao estava entendendo como fazer as configurações no rc.conf >> ai ficou assim >> >> >> MASTER >> ifconfig_em1="up" >> >> /usr/local/etc/freevrrpd.conf >> >> [VRID] >> serverid = 1 >> interface = em1 >> priority = 101 >> addr = 192.168.50.49/30 >> password = vrid1 >> >> >> SLAVE >> ifconfig_em1="up" >> >> /usr/local/etc/freevrrpd.conf >> >> [VRID] >> serverid = 1 >> interface = em1 >> priority = 100 >> addr = 192.168.50.49/30 >> password = vrid1 >> >> >> /var/log/messages >> >> Apr 12 18:09:45 master freevrrpd[2024]: launching daemon in background >> mode >> Apr 12 18:09:45 master freevrrpd[2025]: initializing threads and all VRID >> Apr 12 18:09:45 master freevrrpd[2025]: reading configuration file >> /usr/local/etc/freevrrpd.conf >> Apr 12 18:09:45 master freevrrpd[2025]: no IP address is configured on >> the real interface em1 >> Apr 12 18:09:45 master freevrrpd[2025]: cannot join multicast vrrp group >> without a real ip adress on em1 >> Apr 12 18:09:45 master freevrrpd[2025]: choose an IP address that is not >> used on any VRIDs and restart >> Apr 12 18:09:45 master freevrrpd[2025]: you can set a private address for >> announcing VRRP packets (eg: 192.168.0.1/24) >> Apr 12 18:09:45 master freevrrpd[2025]: exiting... >> >> >> >> Em 12 de abril de 2012 13:15, Alisson <alissongoncal...@bsd.com.br>escreveu: >> >> seguindo a orientação de voces... fiz algumas alterações e instalei o >>> freevrrp para os /30 >>> >>> veja como ficou no rc.conf do MASTER >>> >>> ipv4_addrs_em0="192.168.1.44/25" >>> ipv4_addrs_em1="192.168.2.48/30" >>> >>> /usr/local/etc/freevrrpd.conf >>> >>> #MASTER >>> [VRID] >>> serverid = 1 >>> interface = em1 >>> priority = 101 >>> addr = 192.168.2.49/30 >>> password = vrid1 >>> >>> veja como ficou no rc.conf do SLAVE >>> >>> ipv4_addrs_em0="192.168.1.45/25" >>> ipv4_addrs_em1="192.168.2.48/30" >>> >>> /usr/local/etc/freevrrpd.conf >>> >>> #SLAVE >>> [VRID] >>> serverid = 1 >>> interface = em1 >>> priority = 100 >>> addr = 192.168.2.49/30 >>> password = vrid1 >>> >>> e veja o erro do messages >>> >>> Apr 12 12:10:55 master freevrrpd[4490]: initializing threads and all VRID >>> Apr 12 12:10:55 master freevrrpd[4490]: reading configuration file >>> /usr/local/etc/freevrrpd.conf >>> Apr 12 12:10:55 master freevrrpd[4490]: cannot create an eiface/ether >>> netgraph interface: Address already in use >>> Apr 12 12:10:55 master kernel: ngeth5: link state changed to UP >>> Apr 12 12:10:55 master kernel: ngeth5: link state changed to DOWN >>> Apr 12 12:10:55 master freevrrpd[4490]: ng_ether.ko is probably not >>> loaded, use kldload ng_ether.ko before running freevrrpd >>> Apr 12 12:10:55 master freevrrpd[4490]: cannot create a virtual >>> interface via netgraph: Address already in use >>> Apr 12 12:10:55 master freevrrpd[4490]: check that ng_socket, ng_ether, >>> ng_eiface and ng_bridge are loaded >>> >>> >>> >>> >>> >>> >>> >>> Em 11 de abril de 2012 10:27, Luiz Gustavo < >>> luizgust...@luizgustavo.pro.br> escreveu: >>> >>> On Wed, 11 Apr 2012 09:59:34 -0300 >>>> Alisson <alissongoncal...@bsd.com.br> wrote: >>>> >>>> > isso que eu temia... >>>> > >>>> > entao quer dizer que se voce entrega um /30 para fazer um ponto a >>>> ponto >>>> > para um cliente >>>> > >>>> > voce tera que entregar um /29 >>>> > >>>> > nao tem outro jeito no FreeBSD? >>>> > >>>> >>>> [root@desktop] /usr/ports# cat net/freevrrpd/pkg-descr >>>> freevrrpd is a VRRP (Virtual Router Redundancy Protocol) implementation >>>> daemon under FreeBSD, NetBSD and OpenBSD. >>>> This daemon has been rewritten from scratch and is not based on >>>> existing projects. In this second public release, you can find: >>>> >>>> * A daemon RFC 2338 Compliant adapted on FreeBSD systems >>>> * Implementation of Virtual Adresses >>>> * Support for multiples VRID >>>> * Master announce state by sending multicast packets via BPF >>>> * Changing routes and IP in 3 seconds >>>> * Doing gratuitous ARP requests to clean the cache of all hosts >>>> * Election between different slave servers >>>> * Same host can be Slave and Master at the same time >>>> * Automatic Downgrade to Slave if a Master is up again >>>> * Anti-Address Conflict system >>>> * Multi-threaded vrrp daemon >>>> * Plain text password authentication >>>> * Using now only one BPF device for all VRID >>>> * Support netmask for Virtual IP addresses >>>> * Support for monitored circuit and dependances between VRIDs >>>> * Support for VLAN pseudo devices under *BSD >>>> >>>> -- >>>> --- >>>> Luiz Gustavo Costa (Powered by BSD) >>>> *+*+*+*+*+*+*+*+*+*+*+*+*+*+*+*+*+*+*+*+*+*+*+*+*+ >>>> mundoUnix - Consultoria em Software Livre >>>> http://www.mundounix.com.br >>>> ICQ: 2890831 / MSN: cont...@mundounix.com.br >>>> Tel: 55 (21) 4063-7110 / 8194-1905 / (11) 4063-0407 >>>> Blog: http://www.luizgustavo.pro.br >>>> >>> >>> >> > ------------------------- Histórico: http://www.fug.com.br/historico/html/freebsd/ Sair da lista: https://www.fug.com.br/mailman/listinfo/freebsd
