pessoal. voces tem alguma configuração do freevrrpd de um servidor master e um servidor slave?
dessa vez ao iniciar o freevrrpd todas as interfaces ficaram caindo, parecia algum loop e aparecia essa mensagem interface is faulty deactivated from vrrp vrid Em 13 de abril de 2012 15:25, Alisson <alissongoncal...@bsd.com.br>escreveu: > Boa tarde Luiz Gustavo, > > eu tenho uma interface em outra rede: > > ifconfig_em0="192.168.50.46/25" > > Em 13 de abril de 2012 09:32, Alisson <alissongoncal...@bsd.com.br>escreveu: > > ok.. >> >> eu nao estava entendendo como fazer as configurações no rc.conf >> ai ficou assim >> >> >> MASTER >> ifconfig_em1="up" >> >> /usr/local/etc/freevrrpd.conf >> >> [VRID] >> serverid = 1 >> interface = em1 >> priority = 101 >> addr = 192.168.50.49/30 >> password = vrid1 >> >> >> SLAVE >> ifconfig_em1="up" >> >> /usr/local/etc/freevrrpd.conf >> >> [VRID] >> serverid = 1 >> interface = em1 >> priority = 100 >> addr = 192.168.50.49/30 >> password = vrid1 >> >> >> /var/log/messages >> >> Apr 12 18:09:45 master freevrrpd[2024]: launching daemon in background >> mode >> Apr 12 18:09:45 master freevrrpd[2025]: initializing threads and all VRID >> Apr 12 18:09:45 master freevrrpd[2025]: reading configuration file >> /usr/local/etc/freevrrpd.conf >> Apr 12 18:09:45 master freevrrpd[2025]: no IP address is configured on >> the real interface em1 >> Apr 12 18:09:45 master freevrrpd[2025]: cannot join multicast vrrp group >> without a real ip adress on em1 >> Apr 12 18:09:45 master freevrrpd[2025]: choose an IP address that is not >> used on any VRIDs and restart >> Apr 12 18:09:45 master freevrrpd[2025]: you can set a private address for >> announcing VRRP packets (eg: 192.168.0.1/24) >> Apr 12 18:09:45 master freevrrpd[2025]: exiting... >> >> >> Em 12 de abril de 2012 19:15, Alisson <alissongoncal...@bsd.com.br>escreveu: >> >> ok.. >>> >>> eu nao estava entendendo como fazer as configurações no rc.conf >>> ai ficou assim >>> >>> >>> MASTER >>> ifconfig_em1="up" >>> >>> /usr/local/etc/freevrrpd.conf >>> >>> [VRID] >>> serverid = 1 >>> interface = em1 >>> priority = 101 >>> addr = 192.168.50.49/30 >>> password = vrid1 >>> >>> >>> SLAVE >>> ifconfig_em1="up" >>> >>> /usr/local/etc/freevrrpd.conf >>> >>> [VRID] >>> serverid = 1 >>> interface = em1 >>> priority = 100 >>> addr = 192.168.50.49/30 >>> password = vrid1 >>> >>> >>> /var/log/messages >>> >>> Apr 12 18:09:45 master freevrrpd[2024]: launching daemon in background >>> mode >>> Apr 12 18:09:45 master freevrrpd[2025]: initializing threads and all VRID >>> Apr 12 18:09:45 master freevrrpd[2025]: reading configuration file >>> /usr/local/etc/freevrrpd.conf >>> Apr 12 18:09:45 master freevrrpd[2025]: no IP address is configured on >>> the real interface em1 >>> Apr 12 18:09:45 master freevrrpd[2025]: cannot join multicast vrrp group >>> without a real ip adress on em1 >>> Apr 12 18:09:45 master freevrrpd[2025]: choose an IP address that is not >>> used on any VRIDs and restart >>> Apr 12 18:09:45 master freevrrpd[2025]: you can set a private address >>> for announcing VRRP packets (eg: 192.168.0.1/24) >>> Apr 12 18:09:45 master freevrrpd[2025]: exiting... >>> >>> >>> >>> Em 12 de abril de 2012 13:15, Alisson <alissongoncal...@bsd.com.br>escreveu: >>> >>> seguindo a orientação de voces... fiz algumas alterações e instalei o >>>> freevrrp para os /30 >>>> >>>> veja como ficou no rc.conf do MASTER >>>> >>>> ipv4_addrs_em0="192.168.1.44/25" >>>> ipv4_addrs_em1="192.168.2.48/30" >>>> >>>> /usr/local/etc/freevrrpd.conf >>>> >>>> #MASTER >>>> [VRID] >>>> serverid = 1 >>>> interface = em1 >>>> priority = 101 >>>> addr = 192.168.2.49/30 >>>> password = vrid1 >>>> >>>> veja como ficou no rc.conf do SLAVE >>>> >>>> ipv4_addrs_em0="192.168.1.45/25" >>>> ipv4_addrs_em1="192.168.2.48/30" >>>> >>>> /usr/local/etc/freevrrpd.conf >>>> >>>> #SLAVE >>>> [VRID] >>>> serverid = 1 >>>> interface = em1 >>>> priority = 100 >>>> addr = 192.168.2.49/30 >>>> password = vrid1 >>>> >>>> e veja o erro do messages >>>> >>>> Apr 12 12:10:55 master freevrrpd[4490]: initializing threads and all >>>> VRID >>>> Apr 12 12:10:55 master freevrrpd[4490]: reading configuration file >>>> /usr/local/etc/freevrrpd.conf >>>> Apr 12 12:10:55 master freevrrpd[4490]: cannot create an eiface/ether >>>> netgraph interface: Address already in use >>>> Apr 12 12:10:55 master kernel: ngeth5: link state changed to UP >>>> Apr 12 12:10:55 master kernel: ngeth5: link state changed to DOWN >>>> Apr 12 12:10:55 master freevrrpd[4490]: ng_ether.ko is probably not >>>> loaded, use kldload ng_ether.ko before running freevrrpd >>>> Apr 12 12:10:55 master freevrrpd[4490]: cannot create a virtual >>>> interface via netgraph: Address already in use >>>> Apr 12 12:10:55 master freevrrpd[4490]: check that ng_socket, >>>> ng_ether, ng_eiface and ng_bridge are loaded >>>> >>>> >>>> >>>> >>>> >>>> >>>> >>>> Em 11 de abril de 2012 10:27, Luiz Gustavo < >>>> luizgust...@luizgustavo.pro.br> escreveu: >>>> >>>> On Wed, 11 Apr 2012 09:59:34 -0300 >>>>> Alisson <alissongoncal...@bsd.com.br> wrote: >>>>> >>>>> > isso que eu temia... >>>>> > >>>>> > entao quer dizer que se voce entrega um /30 para fazer um ponto a >>>>> ponto >>>>> > para um cliente >>>>> > >>>>> > voce tera que entregar um /29 >>>>> > >>>>> > nao tem outro jeito no FreeBSD? >>>>> > >>>>> >>>>> [root@desktop] /usr/ports# cat net/freevrrpd/pkg-descr >>>>> freevrrpd is a VRRP (Virtual Router Redundancy Protocol) implementation >>>>> daemon under FreeBSD, NetBSD and OpenBSD. >>>>> This daemon has been rewritten from scratch and is not based on >>>>> existing projects. In this second public release, you can find: >>>>> >>>>> * A daemon RFC 2338 Compliant adapted on FreeBSD systems >>>>> * Implementation of Virtual Adresses >>>>> * Support for multiples VRID >>>>> * Master announce state by sending multicast packets via BPF >>>>> * Changing routes and IP in 3 seconds >>>>> * Doing gratuitous ARP requests to clean the cache of all hosts >>>>> * Election between different slave servers >>>>> * Same host can be Slave and Master at the same time >>>>> * Automatic Downgrade to Slave if a Master is up again >>>>> * Anti-Address Conflict system >>>>> * Multi-threaded vrrp daemon >>>>> * Plain text password authentication >>>>> * Using now only one BPF device for all VRID >>>>> * Support netmask for Virtual IP addresses >>>>> * Support for monitored circuit and dependances between VRIDs >>>>> * Support for VLAN pseudo devices under *BSD >>>>> >>>>> -- >>>>> --- >>>>> Luiz Gustavo Costa (Powered by BSD) >>>>> *+*+*+*+*+*+*+*+*+*+*+*+*+*+*+*+*+*+*+*+*+*+*+*+*+ >>>>> mundoUnix - Consultoria em Software Livre >>>>> http://www.mundounix.com.br >>>>> ICQ: 2890831 / MSN: cont...@mundounix.com.br >>>>> Tel: 55 (21) 4063-7110 / 8194-1905 / (11) 4063-0407 >>>>> Blog: http://www.luizgustavo.pro.br >>>>> >>>> >>>> >>> >> > ------------------------- Histórico: http://www.fug.com.br/historico/html/freebsd/ Sair da lista: https://www.fug.com.br/mailman/listinfo/freebsd
