Peter Cornelius <p...@gmx.net> writes: > [Retransmssion, stupid HTML mails] > > G'day, Carl, > > On 2/28/21 11:26 AM, Carl Johnson wrote: >> I have an 8GB RPi 4B that I am trying out, but it has no USB response at >> all. [...] > > I second the suggestion to do a brief trial with Raspbian or so. I > currently run mine under -current as below, but can confirm that I > have been able to run it since 13 with USB keyboard and mouse. I > currenly am logged in via the net, so without further USB devices, at > least the hubs should be present:
I had tested it with Raspbian, and everything worked properly. > [root@rpi4 ~]# usbconfig > ugen0.1: <0x1106 XHCI root HUB> at usbus0, cfg=0 md=HOST spd=SUPER (5.0Gbps) > pwr=SAVE (0mA) > ugen0.2: <vendor 0x2109 USB2.0 Hub> at usbus0, cfg=0 md=HOST spd=HIGH > (480Mbps) pwr=SAVE (100mA) > > [root@rpi4 ~]# uname -a > FreeBSD rpi4 14.0-CURRENT FreeBSD 14.0-CURRENT #1: Tue Feb 23 02:30:31 > UTC 2021 root@rpi4:/usr/obj/usr/src/arm64.aarch64/sys/GENERIC > arm64 > > I can share a 14.0 image I used to initially boot if you have > somewhere to push it > (FreeBSD-aarch64-14.0-GENERIC-a63eae65ff8-RaspberryPi4.img, seven and > a half gig, roughly; an xz. I'd expect at around two). > > I did, though, have to do a couple of tries with Raspbian initially to put a > recent firmware onto my RPI4B8GB. > > HOWEVER. > > I also have an odd observation which is that there is NO OTHER USB > device BUT the above and my mouse/keyboard. This is quite odd since I > do have more devices connected (most notably a umass > JMicron-JMS561-based device [1]) and naively hoped that also on arm, > USB devices would at least show up as ugen-something. Well, at least > keyboard and mouse did work, did they not? > > I did boot with rasbian, all comes to life instantly and > beautifully. I even was able to update some firmware on the > JMS-thingo, see the disks, all blinkenlights there. Back to FreeBSD -- > again, silence. I now really am scratching my head and also have run > out of ideas... though kind of luxury, compared to you, I guess. > > Any help appreciated, and Carl, as written, if you want my image, where > should I put it? > > Cheers, > > Peter. > > [1] https://www.jmicron.com/file/download/1033/JMS561_Product+Brief.pdf There is another response that states this is a known problem that will be fixed in -RC1, so I will wait to test that one. Maybe your problem will be fixed with that one also. Meanwhile, I will just go back to Raspbian until -RC1 comes out. Thanks for your information. -- Carl Johnson ca...@peak.org _______________________________________________ freebsd-stable@freebsd.org mailing list https://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "freebsd-stable-unsubscr...@freebsd.org"
