Tim Daneliuk <tun...@tundraware.com> writes: > On 2/28/21 11:26 AM, Carl Johnson wrote: >> I have an 8GB RPi 4B that I am trying out, but it has no USB response at >> all. That means that I can't use a keyboard or mouse, but I can use a >> serial console and ethernet. I can plug any USB device into any port, >> but there is nothing logged in /var/messages. Running usbconfig as root >> just reports 'No device match or lack of permissions'. Running >> 'dmesg | grep -i usb' reports only the following lines: >> >> usb_nop_xceiv0: <USB NOP PHY> on ofwbus0 >> bcm_xhci0: <VL805 USB 3.0 controller (on the Raspberry Pi 4b)> irq 81 at >> device 0.0 on pci2 >> usb_needs_explore_all: no devclass >> >> Running 'pciconf -lv' shows there is a VL805 USB controller present. I >> tested this with Linux and everything worked properly. This is a new >> computer that I bought only a couple of weeks ago. Does anybody have >> any ideas on what this might be, or what I could do to try to figure it >> out? >> >> Thanks in advance for any ideas. >> > > > Not to belabour the obvious, but have you booted the machine with Linux > to see if USB works there? (Just to avoid the possibility that you > have bad hardware.)
I did verify that it works on Linux and everything worked properly there. -- Carl Johnson ca...@peak.org _______________________________________________ freebsd-stable@freebsd.org mailing list https://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "freebsd-stable-unsubscr...@freebsd.org"
