Mehmet Erol Sanliturk <m.e.sanlit...@gmail.com> writes: > On Sun, Feb 28, 2021 at 8:26 PM Carl Johnson <ca...@peak.org> wrote: > >> I have an 8GB RPi 4B that I am trying out, but it has no USB response at >> all. That means that I can't use a keyboard or mouse, but I can use a >> serial console and ethernet. I can plug any USB device into any port, >> but there is nothing logged in /var/messages. Running usbconfig as root >> just reports 'No device match or lack of permissions'. Running >> 'dmesg | grep -i usb' reports only the following lines: >> >> usb_nop_xceiv0: <USB NOP PHY> on ofwbus0 >> bcm_xhci0: <VL805 USB 3.0 controller (on the Raspberry Pi 4b)> irq 81 at >> device 0.0 on pci2 >> usb_needs_explore_all: no devclass >> >> Running 'pciconf -lv' shows there is a VL805 USB controller present. I >> tested this with Linux and everything worked properly. This is a new >> computer that I bought only a couple of weeks ago. Does anybody have >> any ideas on what this might be, or what I could do to try to figure it >> out? >> >> Thanks in advance for any ideas. >> -- >> Carl Johnson ca...@peak.org >> >> _______________________________________________ >> > > > > You did not mention which FreeBSD you are using ( please use "uname -a" ) > . > > Personally , I do not know anything about Raspberry Pi with FreeBSD , but > , without knowing which FreeBSD you are using , > it is very likely that no one will be able to give you any information .
You are right that I forgot to mention that. In this case this is the binary 13.0-BETA4 image that I downloaded directly from the FreeBSD website, and verified the checksum. The output of uname -a is: FreeBSD basil 13.0-BETA4 FreeBSD 13.0-BETA4 #0 releng/13.0-n244592-e32bc253629: Fri Feb 26 08:02:53 UTC 2021 r...@releng1.nyi.freebsd.org:/usr/obj/usr/src/arm64.aarch64/sys/GENERIC arm64 Thanks for reminding me. -- Carl Johnson ca...@peak.org _______________________________________________ freebsd-stable@freebsd.org mailing list https://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "freebsd-stable-unsubscr...@freebsd.org"
