On 2025-08-24 17:46, John Dammeyer wrote:
-----Original Message-----
From: Andy Pugh [mailto:bodge...@gmail.com]
> On 24 Aug 2025, at 01:43, andrew beck <andrewbeck0...@gmail.com>
wrote:
>
> There is the forum and Facebook group now too
There is also the IRC and Discord (which are linked so messages to one
go to
the other, and vice-versa)
I value the mailing list as it �pushes� messages. (The forum used send
notifications by email but at least to me no longer does)
I second what Andy said. I prefer the mail list. But I have also
joined the Facebook group. As yet I still haven't solved my tool
length probing issue but then haven't needed to use it since the last
time I was using the mill. Hopefully in the fall that will change.
John
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
I also endorse Andy's comments. I have been a member of this mailing
list for some 20 years and have found the depth of knowledge and
willingness to share a real benefit.
Marcus
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
