I usually just assume it can be done with linuxcnc - then you just have to figure out how... :)
sam On 6/1/2015 2:47 PM, Sven Wesley wrote: > 2015-06-01 16:49 GMT+02:00 Kirk Wallace <[email protected]>: > >> On 06/01/2015 04:50 AM, andy pugh wrote: >>> Yes, this is fairly easy. The stepgen and PID components don't care >>> where their setpoints come from. .... <snip> >>> >>> Rather than CL I would consider making a simple Glade UI to supply the >>> setpoints .... <snip> >> This could be a start to a HAL controller: >> http://www.wallacecompany.com/machine_shop/LinuxCNC/gvcpDRO/ >> >> .... <snip> >> >> > As usual great input. > Maybe I should ditch the idea of using CL and do everything in Python right > away. That's a great idea when I think about it. :) > > There is so much power in LinuxCNC and yet so hard to figure out what can > be done. > Big props to JT and his tutorial pages, they are really good! > > /Sven > ------------------------------------------------------------------------------ > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users > > ------------------------------------------------------------------------------ _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
