On 10/30/2011 8:39 PM, Tom Easterday wrote: > Do either/both of you have a base thread set up and if so what timing is it > set for? Also have you changed the period of the servo thread? If you have > a Mesa card you do not need a base thread generally (unless you really have > something that needs to run at a fast rate)… > > You can get the real time errors if your thread period is too fast for the > hardware. > > Tom > As a followup to Tom's questions, for the stepper-based system have you run the latency test for at least as long as the time of the job(s) that failed (and longer, preferably)? Are your configuration settings consistent with the results of the latency test?
Also, did you check the dmesg output for more details? Out of idle curiosity, what is your motherboard, cpu, etc.? Regards, Kent ------------------------------------------------------------------------------ Get your Android app more play: Bring it to the BlackBerry PlayBook in minutes. BlackBerry App World™ now supports Android™ Apps for the BlackBerry® PlayBook™. Discover just how easy and simple it is! http://p.sf.net/sfu/android-dev2dev _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
