On 9 April 2010 16:41, Slavko Kocjancic <[email protected]> wrote: > After that I start Camera window. I right click camera window and select > always on top and move that window over AXIS preview place. (just fit > inside) > After that I start Learn.py and make that window always on top too and > move over code window of AXIS. > So now I have all windows visible doesn't matter witch is selected. > Now I must click somewhere on AXIS interface and jog machine to > reference point (with help of webcam)
Two possibilities occur to me: 1) You could add "jog" and "store" buttons to the learn.py interface. 2) You could hook up a USB joypad for jogging (well worth doing anyway) and use one or more of the buttons on that to store the learned position. (You can link physical buttons to hal pins that will run G-code fragments, see the [HALUI] section on this page:http://wiki.linuxcnc.org/cgi-bin/emcinfo.pl/emcinfo.pl?Adding_More_Controls_To_Simple_Remote_Pendant -- atp ------------------------------------------------------------------------------ Download Intel® Parallel Studio Eval Try the new software tools for yourself. Speed compiling, find bugs proactively, and fine-tune applications for parallel performance. See why Intel Parallel Studio got high marks during beta. http://p.sf.net/sfu/intel-sw-dev _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
