On Mon, 22 Jun 2009 00:01:32 -0700, you wrote: >.After the first tool you would go to a tool change >(you would use the Axis manual tool change)position automaticly and hit esc or >stop >then you put the next tool in and >touch it off, write it in the tool table in the T2 line >then scroll down to T2M6 in the prog and right click and hit start from here. >I think that is pretty easy.No MDI required.
What a rigmarole ;) Machine stops at toolchange position, change tool, jog Z down to touch top surface of work ( or reference point), press Zero Z, press cycle start - done no MDI or tooltable editing or scrolling about files. Steve Blackmore -- ------------------------------------------------------------------------------ Are you an open source citizen? Join us for the Open Source Bridge conference! Portland, OR, June 17-19. Two days of sessions, one day of unconference: $250. Need another reason to go? 24-hour hacker lounge. Register today! http://ad.doubleclick.net/clk;215844324;13503038;v?http://opensourcebridge.org _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
