On Jan 24, 2009, at 1:37 PM, John Kasunich wrote: > Thomas Kaiser wrote: >> Hi >> >> I replaced the "CNC" controller of a Schaublin 125 CNC with emc2. >> So far >> I can move both axis (x, z) in jog mode and can home them. >> >> But when I jog with max speed (3000mm/sec) the axis still moves >> after I >> released the arrow button. > > You mean it keeps going until it hits the end of travel? > > What are the axis velocity and acceleration limits in your .ini file? > > Does your machine really go 3000mm/second!? That is 180 meters per > minute... > >> I don't know what information do you guys need to help me. Just >> ping me >> and I will (hopefully) provide it. > > How about a more detailed description of what goes wrong? Email is > not > interactive. If we have to ask you a question, wait for the > answer, ask > another question, wait for the answer, etc, this could take forever. > > Provide all information you can when you ask a question. > > Regards, > > John Kasunich > But irc IS interactive and the guys that hang out there are helpful and very good. bring up your irc client then type /join #emc and you are on.
Lacking irc then posting your .ini file on pastebin.ca or some other repository is the best way. Post it then send the link to this list and someone will take a look at it. Good luck. Dave > ---------------------------------------------------------------------- > -------- > This SF.net email is sponsored by: > SourcForge Community > SourceForge wants to tell your story. > http://p.sf.net/sfu/sf-spreadtheword > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users ------------------------------------------------------------------------------ This SF.net email is sponsored by: SourcForge Community SourceForge wants to tell your story. http://p.sf.net/sfu/sf-spreadtheword _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
