On Jan 24, 2009, at 1:26 PM, Thomas Kaiser wrote: > Hi > > I replaced the "CNC" controller of a Schaublin 125 CNC with emc2. > So far > I can move both axis (x, z) in jog mode and can home them. > > But when I jog with max speed (3000mm/sec) the axis still moves > after I > released the arrow button. > > I don't know what information do you guys need to help me. Just > ping me > and I will (hopefully) provide it. > > Regards, Thomas
At 3 m/sec I would expect you to get to the end of the machine rather quickly. Or maybe the machine is the size of a football field. ;-) Dave > > > > ---------------------------------------------------------------------- > -------- > This SF.net email is sponsored by: > SourcForge Community > SourceForge wants to tell your story. > http://p.sf.net/sfu/sf-spreadtheword > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users ------------------------------------------------------------------------------ This SF.net email is sponsored by: SourcForge Community SourceForge wants to tell your story. http://p.sf.net/sfu/sf-spreadtheword _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
