If your using the keyboard arrow keys and you have maxed out your cpu there will be a slight delay from the time you release your key to the information getting to EMC. I just tested my plasma cutter at 400 IPM on an old and slow computer and sometimes the delay is enough for me to notice the overrun.
How did you set up the system? Stepconf Wizard? John On 24 Jan 2009 at 22:26, Thomas Kaiser wrote: > Hi > > I replaced the "CNC" controller of a Schaublin 125 CNC with emc2. So > far > I can move both axis (x, z) in jog mode and can home them. > > But when I jog with max speed (3000mm/sec) the axis still moves > after I > released the arrow button. > > I don't know what information do you guys need to help me. Just ping > me > and I will (hopefully) provide it. > > Regards, Thomas > > > > -------------------------------------------------------------------- > ---------- > This SF.net email is sponsored by: > SourcForge Community > SourceForge wants to tell your story. > http://p.sf.net/sfu/sf-spreadtheword > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users > ------------------------------------------------------------------------------ This SF.net email is sponsored by: SourcForge Community SourceForge wants to tell your story. http://p.sf.net/sfu/sf-spreadtheword _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
