I think you are required to state the power consumption of every port
that consumes power. If your SMPS really is 'intelligent', then the
standard applies. But I wonder what the relevant definition of
'intelligent' is. There appears to be no method of measurement for IQ!
On 2024-08-22 17:53, Richard Nute wrote:
Hi Bostjan:
While this does not answer your specific questions, it may be helpful:
https://en.wikipedia.org/wiki/IEC_61850
Good luck, and best regards,
Rich
*From:*Boštjan Glavič <[email protected]>
*Sent:* Thursday, August 22, 2024 4:32 AM
*To:* [email protected]
*Subject:* [PSES] Burden test
Dear all,
Is anyone familiar with burden test according IEC 61850-3 standard? Is
this test applicable for switch mode power supply with AC input and
DC output?
How to conduct the test? What is the idea of the test?
Standard is not really clear.
Thank you for your support.
Best regards,
Bostjan
------------------------------------------------------------------------
This message is from the IEEE Product Safety Engineering Society
emc-pstc discussion list. To post a message to the list, send your
e-mail to [email protected]
All emc-pstc postings are archived and searchable on the web at:
https://www.mail-archive.com/[email protected]/
Website: https://ewh.ieee.org/soc/pses/
Instructions: https://ewh.ieee.org/soc/pses/list.html (including how
to unsubscribe) <https://ewh.ieee.org/soc/pses/list.html>
List rules: https://ewh.ieee.org/soc/pses/listrules.html
For help, send mail to the list administrators:
Mike Sherman at: [email protected]
Rick Linford at: [email protected]
For policy questions, send mail to:
Jim Bacher at: [email protected]
------------------------------------------------------------------------
To unsubscribe from the EMC-PSTC list, click the following link:
https://listserv.ieee.org/cgi-bin/wa?SUBED1=EMC-PSTC&A=1
--
OOO - Own Opinions Only
Best Wishes
John Woodgate
Keep trying
--
This email has been checked for viruses by AVG antivirus software.
www.avg.com
-
----------------------------------------------------------------
This message is from the IEEE Product Safety Engineering Society emc-pstc
discussion list. To post a message to the list, send your e-mail to
[email protected]
All emc-pstc postings are archived and searchable on the web at:
https://www.mail-archive.com/[email protected]/
Website: https://ewh.ieee.org/soc/pses/
Instructions: https://ewh.ieee.org/soc/pses/list.html (including how to
unsubscribe)
List rules: https://ewh.ieee.org/soc/pses/listrules.html
For help, send mail to the list administrators:
Mike Sherman at: [email protected]
Rick Linford at: [email protected]
For policy questions, send mail to:
Jim Bacher: <[email protected]>
_________________________________________________
To unsubscribe from the EMC-PSTC list, click the following link:
https://listserv.ieee.org/cgi-bin/wa?SUBED1=EMC-PSTC&A=1
