Hi Bostjan:
While this does not answer your specific questions, it may be helpful: https://en.wikipedia.org/wiki/IEC_61850 Good luck, and best regards, Rich From: Boštjan Glavič <[email protected]> Sent: Thursday, August 22, 2024 4:32 AM To: [email protected] Subject: [PSES] Burden test Dear all, Is anyone familiar with burden test according IEC 61850-3 standard? Is this test applicable for switch mode power supply with AC input and DC output? How to conduct the test? What is the idea of the test? Standard is not really clear. Thank you for your support. Best regards, Bostjan - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to [email protected] All emc-pstc postings are archived and searchable on the web at: https://www.mail-archive.com/[email protected]/ Website: https://ewh.ieee.org/soc/pses/ Instructions: https://ewh.ieee.org/soc/pses/list.html (including how to unsubscribe) List rules: https://ewh.ieee.org/soc/pses/listrules.html For help, send mail to the list administrators: Mike Sherman at: [email protected] Rick Linford at: [email protected] For policy questions, send mail to: Jim Bacher: <[email protected]> _________________________________________________ To unsubscribe from the EMC-PSTC list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=EMC-PSTC&A=1
